Mitsubishi LJ61BT11 User Manual page 159

(2) Remote device station initialization procedure setting method
8 - 53
Configure the settings in "Remote Device Station Initial Setting" in the Network
Parameter setting.
For setting examples using GX Works2,
refer to Sections 11.1.2 (4), 11.2.2 (4), and 11.3.2 (4).
(a) In "Target Station No.", set the station number of the module for which the
initial settings are to be performed.
Setting range: 1 to 64
(b) Set the initial setting procedure in "Regist Procedure".
1) Input format
Set the data input format for "Write Data" in details of execution.
Setting range: DEC.
Default:
2) Execute Flag
Set whether or not to execute the specified initial setting procedure.
Setting range: Execute
Default:
HEX.
DEC.
Only set (use as a memo when the execution conditions
are the same as when the execution flag is set as
"Execute", but the content of execution is different.)
Execute
8 FUNCTIONS
8 - 53