Setting Operation; Installing 32Nt-Dp Parameters In The Dp-Master; Dp-Slave Address Setting In The Dp-Master - Mitsubishi MELSEC-FX0N Series User Manual

FX0N-32NT-DP Profibus-DP Interface Unit
5.

Setting Operation

For details how to set-up a DP-master please refer to the appropriate DP-master manuals.
5.1

Installing 32NT-DP Parameters in the DP-master

To be able to exchange data with a DP-master the 32NT-DP must receive a valid parameter
and configuration data message from the DP-master.
The 32NT-DP parameters are stored in the GSD File (General Station Description File).
This file must be read by the configuration software of the DP-master. Then it is the task of the
user to set the DP-slave address and the number and format of the input and output words to
the configuration data. After which the configuration can be downloaded to the DP-master.
5.1.1

DP-slave Address Setting in the DP-master

A DP-master of class 2 or more can set a DP-slave address from the DP-master. For details of
how to set-up a DP-master please refer to the appropriate DP-master manuals.
Setting Operation 5
5-1