8.3.5 Error invalid station setting function
8 - 66
This function prevents slave stations that are powered off in the system configuration
from being treated as "data link faulty stations" by the master station and local stations,
using the network parameter settings.
Note that if a station is set as an error invalid station, problems occurring in that station
can no longer be detected. In addition, the error invalid station settings cannot be
changed while online because they are set with the network parameters.
POINT
(1) If a slave station that is set as an error invalid station is "specified as a
reserved station," the reserved station function overrides the error invalid
station setting function.
(2) If errors are generated at all the stations when they are set as error-invalid
stations, the "ERR." LED will light.
[Setting method]
Set the reserved function in "Station Information Setting" of the Network
Parameter setting in GX Works2. (Refer to Sections 7.2.2, 7.3.2, and 7.4.2.)
8 FUNCTIONS
8 - 66