11 EXAMPLE OF COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE DEVICE STATIONS
11.2.2 Parameter setting
11 - 15
(1) Setting the network parameters and automatic refresh parameters
of the master station
Set the network parameters and automatic refresh parameters as follows.
Refer to 11.2.2 (2) for the operation setting. Refer to 11.2.2 (3) for the station
information setting. Refer to 11.2.2 (4) for the remote device station initial setting.
POINT
(1) When setting X, Y, B, W, SB and SW as refresh devices, make setting so that
they do not overlap with the device numbers used on the other networks, etc.
(2) When setting X and Y as refresh devices, set I/O numbers higher than the I/O
numbers used for I/O modules and intelligent function modules.
Refer to Section 11.2.2 (2).
Refer to Section 11.2.2 (3).
Refer to Section 11.2.2 (4).
11 - 15