Mitsubishi LJ61BT11 User Manual page 74

7
7 - 2
POINT
(1) If network parameters are set for modules on a system by both GX Works2 and
the G(P).RLPASET instruction, the module(s) whose network parameters are
set by the G(P).RLPASET instruction should not be included in the "Number of
Modules" setting of GX Works2.
(2) For using the built-in CC-Link function, confirm that "Use built-in CC-Link" is
selected in "PLC Parameter" – "PLC System" - "Built-in CC-Link Setting".
(Default: Selected)
If the built-in CC-Link function is not to be used, clear the "Use built-in CC-Link"
setting in "Built-in CC-Link Setting". (It will be offline.)
7 PARAMETER SETTINGS
7 - 2