G(P).Risend - Mitsubishi LJ61BT11 User Manual

9.1.5 G(P).RISEND

Internal device
(System, user)
Set data
Bit
(S1) —
(S2) —
(S3) —
(D)
[Instruction [Execution
symbol] condition]
G.RISEND
GP.RISEND
1
Device
Start I/O number of the module
Un
(First 2 digits of I/O No. with three digits)
(S1) Start number of the device in which control data is stored.
(S2) Start number of the device to which write data is to be stored.
Start number of the device in which the interlock signals are
(S3)
stored.
Device that is turned ON for one scan upon completion of
(D)
writing. (D)+1 also turns ON at an abnormal completion.
1 The file register of each of the local device and the program cannot be used as a device for setting data.
9 - 20
The G(P).RISEND instruction automatically performs handshaking with an intelligent
device station and writes data to the buffer memory of the specified intelligent device
station.
Available for modules that have signals for the handshake (e.g. AJ65BT-R2N).
Link direct device
File
register
Word Bit
Command
Command
Description
9. DEDICATED INSTRUCTIONS AND PROGRAMMING
Usable devices
Intelligent
J \ function
module
device
Word
U \G
—
—
—
—
Un
G.RISEND
Un
GP.RISEND
Set data
Within the range of the
specified device
Within the range of the
specified device
Within the range of the
specified device
Within the range of the
specified device
Constant
Index
register
Z
K, H
—
—
—
—
(S1) (S2) (S3)
(S1) (S2) (S3)
Setting range
0 to FE
H
Other
S
— —
— —
— —
— —
(D)
(D)
Data type
Binary 16 bits
Device name
Bit
9 - 20