Parameter Settings In Remote I/O Net Mode - Mitsubishi LJ61BT11 User Manual

7.5 Parameter Settings in Remote I/O Net Mode

Item
Set the "Number of Modules" for which the network parameters are to be
set.
Default value: Blank
Setting range: Blank, 1 to 4 (boards)
Number of Modules
For L02CPU, setting range: Blank, 1 to 2 (boards)
Modules for the parameter setting with the G(P).RLPASET instruction
should not be included in the setting for "Number of Modules".
Set the "Start I/O No." of the master station.
Default value: Blank
Start I/O No.
Setting range: 0000 to 0FE0
The "Operation Setting" screen is displayed by clicking the Operation
Operation Setting
Setting button.
Set the station type to "Master Station".
Type
Default value: Master Station
Set the CC-Link mode to "Remote I/O Net Mode".
Mode
Default value: Remote Net (Ver.1 Mode)
Set the transmission speed of the module.
Default value: 156kbps
Setting range: 156kbps
Transmission Speed
7 - 30
This section explains the parameter settings using GX Works2.
The following shows the network parameter screen.
The following shows the setting items of the network parameter screen.
625kbps
2.5Mbps
5Mbps
10Mbps
Description
7 PARAMETER SETTINGS
Standby
Master Local
Master Reference
station station
station
Section
Section
Section
: Available, : Not available
(To the next page)
7 - 30
――
――
7.5.1
――
3.4
7.2 (2)