Hardware Test - Mitsubishi LJ61BT11 User Manual

6.2 Hardware Test

6 - 3
The hardware test checks whether or not each module works properly by itself. Always
perform this hardware test before configuring the system.
POINT
Be sure to execute the hardware test in the following status.
(1) Perform this hardware test by itself and without connecting any CC-Link
Ver.1.10 compatible cable. If the hardware test is performed with the cable
connected, it may result in an abnormal termination.
(2) Execute the hardware test in the condition where no CPU error has occurred. If
the hardware test is performed with a CPU error occurred, the test may not be
completed.
Execute the hardware test using the following procedure.
6 INSTALLATION AND CONNECTION
6 - 3