Mitsubishi LJ61BT11 User Manual page 94

Item
Set the module station number.
Default value: 0
Setting range [Master station]
Station No.
Set the CC-Link mode to "Remote Net (Additional Mode)".
Mode
Default value: Remote Net (Ver.1 Mode)
Set the transmission speed of the module.
Default value [Master station and Master station (Duplex function)]
Transmission Speed Setting range: Auto Following (Local station and standby master station)
Set the total number of connected stations in the CC-Link system including
reserved stations for "Total Module Connected".
Total Module Connected
Default value: 64 (modules)
Setting range: 1 to 64 (modules)
Set the remote input (RX) refresh device.
Default value: Blank
Remote Input (RX) Setting range: Device name - Select from X, M, L, B, D, W, R or ZR.
Set the remote output (RY) refresh device.
Default value: Blank
Setting range: Device name - Select from
Remote Output (RY)
Set the remote register (RWr) refresh device.
Default value: Blank
Remote Register (RWr) Setting range: Device name - Select from M, L, B, D, W, R or ZR.
Set the remote register (RWw) refresh device.
Default value: Blank
Setting range: Device name - Select from
Remote Register (RWw)
7 - 22
Description
: 0
[Master station (Duplex function)]
: 0 to 64
[Local station and standby master station]
: 1 to 64
: 156kbps
[Local station and standby master station]
: Auto Following
156kbps
625kbps
2.5Mbps
5Mbps
10Mbps
Device number - Within the range of the device points that
the CPU has.
Y, M, L, B, T, C, ST, D, W, R or ZR.
Device number - Within the range of the device points that
the CPU has.
Device number - Within the range of the device points that
the CPU has.
M, L, B, T, C, ST, D, W, R or ZR.
Device number - Within the range of the device points that
the CPU has.
7 PARAMETER SETTINGS
Standby
Master Local
Master Reference
station station
station
Section
Section
Section
: Available, : Not available
(To the next page)
7 - 22
7.2 (1)
3.4
7.2 (2)
――
――
――
――
――