Mitsubishi LJ61BT11 User Manual page 225

Processing at completion of the G(P).RLPASET instruction
Parameter setting change
Parameter change instruction
G(P).RLPASET instruction
Control data
Slave station setting data
Send, receive and automatic refresh buffer assignment data
*1 Set the station number in hexadecimal. (Example) Set 14
9 - 42
Performs abnormalcompletion processing
for station No. 20.
H
9. DEDICATED INSTRUCTIONS AND PROGRAMMING
Turn the parameter setting
instruction off.
Instruct to refresh at normal
completion of the G(P).RLPASET
instruction.
Instruct to start the control
program at normal completion
of the G(P).RLPASET instruction.
Instruct to stop data link
Turn the data link stop
instruction off
Instruct to stop refreshing
Instruct to change parameters
Clear complete status
Slave station setting data/send,
receive and automatic refresh
buffer assignment data: Valid
Number of connected modules
involved in communication: 3
Number of retries: 3 times
Number of automatic return
modules: 1 module
Operation specification when
CPU is down: Stop
Scan mode specification:
Asynchronous
Delay time setting: 0
First:
Second:
Third:
First (station number 1) local station
Send buffer: 100 word
First (station number 1) local station
Receive buffer: 100 word
First (station number 1) local station
Automatic refresh buffer: 0 word
Local station, occupies
1 station, station
number 1 *1
Remote I/O station,
occupies 1 station,
station number 2
Remote I/O station,
occupies 1 station,
station number 3
9 - 42