Hatch Lock Cylinder Replacement - Honda EP3 Service Manual

Hatch Lock Cylinder Replacement
NOTE; Put on gloves to protect your hands.
'1.
Remove these items:
. Hatch lower trim panel (see page 20-53).
. Rear license trim (see page 20-98).
2. Disconnect the cylinder rod (A)
- . .
From outside the hatch, remove the bolt securing
the lock cylinder {A}. From inside the hatch, pull the
l o c k c y l i n d e r o u t b y r e l e a s i n g t h e h o o k ( B ) .
Fastener Location
> : Bolt, 1
rS'l-.
u-ar
6 x 1 . 0 m m
9 . 8 N m
(1.0 kgf m,7.2lbt.ftl
*/t
4. Install the lock cylinder in the reverse order of
removal, and note these items:
. Make sure the rod is connected properly.
. Make sure the hatch opens properly and locks
securely.
20-111