1155SBM2003A
20-3. Roller Separation Control
This control prevents overlapped turnover during multiple copies. The control oper-
ates by disengaging the Transport Roller Drive Roller from the Transport Roller in
the event that the leading edge of a copied sheet arrives at the Transport Roller
before the trailing edge of the previous sheet has cleared this roller. Separation is
generated by activation of the Turnover Roller Separator Solenoid.
Activation of the Turnover Roller Interval Solenoid causes a lever to press against
the Turnover Roll, so that the Turnover Roller Drive Roller moves away from the
Turnover Roller.
Turnover Roller
Drive Roller
Turnover Roller Interval Solenoid
(SL2)
CONTROL SIGNAL
SL2
PJ6A-2B
M-127
Turnover Roller
ON
OFF
L
H
Turnover Roll
1155M027AA
WIRING DIAGRAM
G-1