Cleaning And Replacement Of The Developer Side Seals - Minolta Di 620 Manual

* Identifying the 1st Sleeve/Magnet Roller and its Bushing from the 2nd Sleeve/Magnet Roller and its
Bushing
Blue
Gray
Groove in Shaft: 2nd
Sleeve/Magnet Roller

3) Cleaning and Replacement of the Developer Side Seals

Install the spring and developing bias terminal as
illustrated on the left
1075D228AB
Using a brush, whisk dust and dirt off the Developer side
seals.
1075D230AA
Replacement
1. Remove the Developing Unit.
2. Peel off the Developer side seals and replace them with
new ones.
1155D123AA
No Groove in Shaft: 1st
Sleeve/Magnet Roller
NOTE
D-54
1075D227AA