Cleaning Of The Pc Drum Charge Corona Housing; Cleaning And Replacement Of The Grid Mesh; Removal Of The Image Transfer/Paper Separator Coronas - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

2) Cleaning of the PC Drum Charge Corona Housing

Using a soft cloth dampened with alcohol, wipe clean the

corona housing.

Use care when cleaning the housing, as it is easy to

Blow all foreign matter off the Grid Mesh with a blower brush.

If the blower brush is not effective in cleaning the Grid

Mesh, use a soft cloth dampend with alcohol to clean

serious contamination.

Place the Grid Mesh on a flat surface and sweep the

cloth along the mesh.

Do not touch the cleaned Grid Mesh with bare hands.

1. Open the Front Lower Door.

2. Lower Lever M4 and slide out the Transport Tray Assy.

3. Remove one screw and the fixing bracket.

4. Remove the Image Transfer/Paper Separator Coronas.

5. Unplug the connector of the Image Transfer/Paper

Separator Charge Wire Cleaning Motor.

Table of Contents