Security Mode; Security Mode Menu Screen; Security Mode Function Setting Procedure - Minolta Di 620 Manual

6

SECURITY MODE

•
This Function allows the Tech. Rep. to make various settings.

6-1. Security Mode Menu Screen

1155SBS0602A

6-2. Security Mode Function Setting Procedure

<Setting Procedure>
1. Set the copier into the Tech. Rep. mode by one of the following methods :
1) With the copier turned ON, press the Tech. Rep. Setting Switch.
2) With the Meter Count screen opened from Utility, press the following keys in this order :
Stop Key
2. Enter the Security mode by pressing the following keys in this order :
Stop Key
3. Select the particular Security mode to be set.
4. Make the necessary settings by following the instructions given sequentially on the screen.
Note: The Function selected is highlighted.
<Exiting the Mode>
Perform any one of the following steps to go back to the Basic screen.
1) Press the Panel Reset key and Touch [Exit] on the Tech. Rep. Mode screen.
2) Touch [Menu] on the Security Mode screen. Then touch [Exit] on the Tech. Rep. Mode screen.
0 0
9
S-50
1155S010CA
Stop Key 0 1