Image Transfer/Paper Separator Hv - Minolta Di 620 Manual

Symbol
SW1
SW2-1
SW2-2
SW2-3
Factory-Setting
SW2-4
Switches
SW2-5
SW2-6
SW2-7
SW2-8
LED1 Operation Check LED
LED2 Error Check LED
SCSI Communications
LED3
Check LED
Initialization Completion
LED4
Check LED
1155SBS0307A

3-7. Image Transfer/Paper Separator HV

Symbol
DIP301-1
DIP301-2
Paper Separator
DIP301-3
Corona Output Fine-
DIP301-4
Adjustment Switches
Name
Used when making factory settings.
Note 1: NEVER use these switches in the field.
Note 2: All should be set to "OFF."
Starts blinking at 0.5-sec. intervals when the Power Switch
is turned ON.
Lights up when an error occurs.
Lights up when SCSI communications are possible.
Lights up if initialization is completed.
Name
When traces of the PC Drum Paper Separator Fingers are
evident on the copy, adjust the Paper Separator Corona out-
put to change it for a greater value.
Note 1: Change the positions of DIP301-1 and 2 for the copy
Note 2: Changing the setting could result in AC mark occur-
Note 3: Check for image quality after the Paper Separator
Description
Description
made in the first copy cycle, and DIP301-3 and 4 for
the copy made in the second copy cycle.
ring on the copy.
Corona wire has been replaced.
Corona Output DIP
Low
High
S-11
1155S017AA
DIP DIP
301-1 301-2 301-3
OFF OFF OFF
ON OFF ON
OFF ON OFF
ON ON ON
DIP
301-4
OFF
OFF
ON
ON