Fusing Unit; Removal Of The Fusing Unit; Disassembly Of The Fusing Unit And Replacement Of Parts - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

2-8. FUSING UNIT

1. Swing down the Front Lower Door.

2. Lower Lever M4 and slide out the Transport Tray Assy.

3. Remove three screws and the Fusing Front Cover.

4. Unplug one connector.

5. Remove one screw and the Fusing Unit.

When the Fusing Unit has been replaced, clear the count

of Fusing Unit of PM Counter 4/4 and Waste Toner-Count

of Consumables Counter available from Tech. Rep.

1. Remove the Fusing Unit.

2. Remove four screws and the Web Roller Assy.

For the Web Roller Assy, see p. D-63.

3. Remove one screw each at the front and rear and the

Upper Paper Separator Fingers Assy.

For the Upper Paper Separator Fingers Assy, see

Table of Contents