5
TECH. REP . MODE
•
This mode is used by the Tech. Rep. to set, check, adjust, and/or program various service functions.
5-1. Tech. Rep. Mode Menu Screen
1155SBS0502A
5-2. Tech. Rep. Mode Function Setting Procedure
<Setting Procedure>
1. Either one of the following two steps may be used to set the copier into the Tech. Rep. mode:
1) With the copier turned ON, press the Tech. Rep. Setting Switch.
2) With the Meter Count screen opened from Utility, press the following keys in this order:
Stop Key
2. Select the particular Tech. Rep. mode function to be set.
3. Make the necessary settings by following the instructions given sequentially on the screen.
Note: The function selected is highlighted.
<Exiting the Mode>
•
Touch [Exit] on the screen to go back to the Basic screen.
0
0
S-21
Stop Key
0
1