Removal Of The Lift-Up Motor (Metric Areas Only - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

6) Removal of the Lift-Up Motor (Metric areas only)

1. Remove the Right Rear Cover and Rear Cover.

2. Unplug the connectors from Toner Replenishing Motor

Control Board and Drawer S/P Board and remove the

harness from the wiring saddle.

3. Remove four screws and the mounting brackets for the

Toner Replenishing Motor Control Board and the Drawer

4. Remove the Toner Collecting Bottle. Remove two screws,

unplug one connector, and remove the metal plate.

5. Remove four screws to free the Vertical Transport Motor

6. Remove five screws. Slightly raising the Paper Take-Up

Drive Assy, remove it together with the Vertical Transport

7. Unplug two connectors, remove two screws and the Lift-Up

8. Remove the C-clip and the Lift-Up Motor.

Table of Contents