Control Panel Keys And Indicators - Minolta EP3000 Operator's Manual

2-12

4. Control Panel Keys and Indicators

Touch Panel
• Shows various screens and messages.
Touch Panel
See
Start Key
• Press to start a copy cycle.
• If pressed while the copier is warming up,
it enables the Auto Copy Start Function.
p. 2-17
Clear Key
Press to:
• Reset the multi-copy entry to 1.
• Clear a zoom ratio entered when setting
one from the 10-Key Pad.
Stop Key
• Press to stop a multi-copy cycle.
Panel Reset Key
• Press to set the copier into the initial
mode, clearing all settings made
previously on the control panel.
p. 2-17
NOTE
If does not, however, clear the contents of the
zoom and job program memory and the settings
made immediately before the Interrupt mode.
User Mode
Job Recall
Mode Check
p. 2-14
p. 3-3
p. 3-3
NOTE
This key becomes valid only when Copy Track of
p. 3-16
the Administrator mode available from User's
Choice is set.
p. 3-3
p
R s [ ¯ «
Z x I [ g
Z x
Interrupt Key p. 2-18
• Press to interrupt a current job with a
different one.
• Press it again to return to the previous job.
Energy Saver Key
• Press to set the copier into the Energy
Saver mode. p. 2-18
Access Mode Key
• Press to enter the access number.
p. 2-19
10-Key Pad
Use to enter:
• The number of copies to be made.
p. 3-3
• The zoom ratio to be used.
• The number of originals.
d ª · e R s
•
x1.000 p
{ ƒ
1149o003
p. 3-16