Cleaning Of The Exposure Lamp; Replacement Of The Exposure Lamp Heater - Minolta Di 620 Manual

8) Cleaning of the Exposure Lamp

9) Replacement of the Exposure Lamp Heater

P
35mm
Exposure Lamp
Open Ends
Approx.
3 mm or
more
Exposure Lamp Heater
1. Remove the Scanner Cover.
2. Using a soft cloth dampened with alcohol, clean the lamp
by gently wiping its surface in one direction.
1155D048AA
Replacement
1. Remove the Scanner Cover.
2. Remove the heater harness from the cord clamp and edge
cover.
3. Turn the Exposure Lamp in the direction of the arrow to
remove it from the holder, then replace it with a new one.
NOTE
Do not touch the Exposure Lamp with bare hands when
1155D219AA
cleaning or replacing it. If the lamp has been replaced,
perform Address Adjust.
1. Remove the Scanner Cover.
2. Remove the Exposure Lamp.
3. Remove the Exposure Lamp Heater from the Exposure
Lamp and replace it with a new one.
1155D220AA
NOTE
Make sure of the precautions given in illustrations on the
left when mounting the Exposure Lamp Heater.
1155D221AA
1155D222AA
D-35