1151SBS0700A
7
ADJUST
•
The Adjust mode is for adjustments to be made before shipment at the factory. As a rule, use this
mode only when RAM Board or Memory Board (IC28B) has been replaced with a new one. If the
setting has been changed, input the value given on the Adjust Mode Label on the inside of the Front
Door.
7-1. Adjust Menu Screen
1155SBS0702A
7-2. Adjust Function Tree
Adjust
Printer
IR
Zoom (FD) EDH
Feed (2)
Feed (FD)
Feed (CD)
EDH
S-ADF Feed (FD)
S-ADF Feed (CD)
Regist. Loop (1)
Regist. Loop (2)
Feed Position
S-52
1155S012CA
Registration (CD)
Registration(FD)
Zoom (FD) Adjust
Fusing ( °C) Input
Image Density
ATDC control
Zoom (CD)
Zoom (FD) Manual
Scale (FD)
Scale (CD)
Exp. Lamp Adjust
Exp. Lamp address