Removal Of The Lift-Up Motor (Inch Areas Only - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

18) Removal of the Lift-Up Motor (Inch areas only)

4. Unplug one connector and remove one screw and flat

cable mounting bracket.

5. Remove the Front Right Cover, Drawer Stoppers, and the

1. Slide out the drawer.

2. Remove one screw and the Lift-Up Motor Cover.

3. Unplug one connector.

4. Remove one E-ring and the Lift-Up Motor.

If the Lift-Up Motor is replaced with a new one, loosen

the screw and, while lightly pressing the Lift-Up Motor

fixing bracket in the direction of the arrow, tighten the

Table of Contents