14
3. Control Panel Keys and Touch Panel
Touch Panel
1
•
Shows various screens and messages.
See Touch Panel
Start Key
2
•
Press to start a copy cycle.
•
If pressed while the copier is warming
up, it enables the Auto Copy Start
➭
Function.
p. 23
Stop Key
3
•
Press to stop a multi-copy cycle.
➭
p. 35
Clear Key
4
Press to:
•
Reset the multi-copy entry to 1.
•
Clear a zoom ratio entered when setting
one using the 10-Key Pad.
Panel Reset Key
5
•
Press to set the copier into the initial
mode, clearing all settings made
previously on the control panel.
Note: It does not, however, clear the
contents of the zoom and job
program memory and the settings
immediately before the Interrupt
mode.
➭
p. 16
➭
p. 35
➭
p. 34
➭
p. 22
10
User Mode
Job Recall
Mode Check
12
11
Interrupt Key
6
•
Press to interrupt a current job with a
different one. Press it again to return to
the previous job.
Energy Saver Key
7
•
Press to set the copier into the Energy
➭
Saver Mode.
Access Mode (ID) Key
8
•
Use to set the Access mode.
Note: For details see the User's Choice.
➭
p. 25
10-Key Pad
9
Use to:
•
Enter the number of copies to be made.
•
Enter the zoom ratio to be used.
•
Enter the number of originals.
Auxiliary
Finishing
Orig. Copy
Ready to Copy
Auto Exp.
x1.000
Exposure
Zoom
1
➭
p. 36
p. 24
Basic
1
Auto Paper
Paper