Electrical/Image Adjustment; Touch Panel Adj - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

3-8. ELECTRICAL/IMAGE ADJUSTMENT

When is this adjustment required?

Be sure to perform the Touch Panel Adj. after the following items have been done.

1) Memory Clear

2) Control Panel replacement

Adjustment Procedure

1. Call the Tech. Rep. mode to the screen.

2. Touch [Tech. Rep. Choice] and [System Set], in that order.

3. Touch [Touch Panel Adj.].

6. Touch [End]. Then, touch [Menu] to recall the Tech. Rep. mode to the screen.

4. Touch the four crosses (+) on the screen in sequence.

These crosses may be touched in any order; but be sure to

touch the center of each cross.

5. The cross touched changes into a grid marker (consisting

of a square with a cross superimposed) and the

adjustment is completed when [END] is touched.

Table of Contents