Toner Conveying/Collecting Mechanism - Minolta Di 620 Manual

1155SBM1502A

15-2. Toner Conveying/Collecting Mechanism

The toner which has been scraped off the surface of the PC Drum by the Cleaning
Blade is conveyed to the rear of the copier by the Toner Conveying Coil and
dropped into the Toner Collecting Bottle through the Toner Chute.
The Toner Conveying Coil is driven by PC Drum Drive Motor.
The Toner Collecting Bottle has a capacity of approx. 13 liters.
Toner Collecting Bottle Set Sensor is provided to detect that the Toner Collecting
Bottle is installed so that the copier can inhibit the initiation of a copy cycle if the
Toner Collecting Bottle is missing.
Residual Toner
Toner Conveying Coil
Toner Collecting Bottle
Toner Collecting Bottle
Set Sensor (PC53)
CONTROL SIGNAL UNBLOCKED
PC53
Cleaning Blade
PJ11F-2
M-108
BLOCKED
H L
M2
PC Drum Drive Motor
1155M019AA
WIRING DIAGRAM
G-32