Parts Which Must Not Be Touched - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

1151SBD0104B

1-4. PARTS WHICH MUST NOT BE TOUCHED

(1) Red painted Screws

Purpose of Application of Red Paint

Red painted screws show that the assembly or unit secured can only be adjusted or set at the factory

and shall not be readjusted, set, or removed in the field.

Note that when two or more screws are used on the part in question, only one representative screw

may be marked with red paint.

(2) Variable Resistors on Board

Do not turn the variable resistors on boards for which no adjusting instructions are given in

"ADJUSTMENT."

(3) Other Screws

Although not marked with red paint, the following screws must not be loosened or readjusted.

4 screws on the PH Unit Cover

Table of Contents