Table of Contents
Advertisement
1155SBS050403A
3) System Input
•
This function allows the Tech. Rep. to change the fixed zoom ratios, set the paper size, define the
marketing area, configure for the Key Counter, and input the telephone number.
<Setting Procedure>
1. Touch [System Input] to open the System Input menu screen.
2. Touch the desired subfunction key.
Touch Panel Display
Change Fixed Zoom
Paper Size Input
Marketing Area
Tel. # Input
CH Wire Cleaning
Tech. Rep. Mode
Setting (The default is
Change a fixed zoom ratio to a desired value in the range between X0.250
and X4.000.
<Procedure>
1. Touch the key of the fixed zoom ratio to be changed.
2. Press the Clear key to clear the setting and enter the new ratio from the
10-Key Pad.
3. Touch [Enter] to validate the new setting.
Set the size of the paper used in each paper source.
<Procedure>
1. Touch the key of the paper source for which the paper size setting is to
be changed to show the Paper Size Input 2 screen.
2. Touch the desired paper size key.
Note: If the 10-Key Pad has been selected, enter the FD and CD size of
the paper from the 10-Key Pad.
3. Touch [End] to validate the paper size setting.
Select the marketing area to set the paper size and fixed zoom ratios.
<Procedure>
1. Touch the desired marketing area key.
2. Touch [End] to validate the marketing area setting.
MJ
Input the telephone number that will appear on the Touch Panel when a
malfunction occurs in the copier.
<Procedure>
1. Enter the phone number (consisting of up to 19 digits) from the 10-key
Pad.
Note: Use the Interrupt key to enter a hyphen "-".
2. Touch "OK" to validate the phone number setting.
Select whether or not to run an automatic cleaning sequence of each
corona wire when the Power Switch is turned ON.
ON
S-32
System Input
Highlighted
MC
MH
.)
Others
OFF
Advertisement
Chapters
Table of Contents
