Types Of Misfeed Detection And Detection Timings - Minolta Di 620 Manual

1155SBT0302A

3-2. Types of Misfeed Detection and Detection Timings

<Copier Take-Up Misfeed>
Type
Paper take-up failure
detection
Paper take-up trailing edge
detection
Leading edge detection by
Transport Roller Sensor
PC1
<Multi Bypass Misfeed>
Type
Bypass paper take-up fail-
ure detection
<Transport/Separator Misfeed>
Type
Leading edge detection by
Paper Leading Edge Sen-
sor PC2
Leading edge detection by
Paper Exit Switch S10
Leading edge detection by
Turnover Feed Entry Sen-
sor PC11
<Fusing/Exit Misfeed>
Type
Trailing edge detection by
Paper Exit Switch S10
1st Drawer Paper Take-Up Sensor PC32 is not blocked ([L]) even after the
lapse of approx. 0.3 sec. after 1st Drawer Paper Take-Up Clutch CL3 has
been energized (after two paper take-up retry sequences).
Note: This also applies to the 2nd and 3rd Drawers.
PC32 is not unblocked ([H]) even after the lapse of T (which varies
depending on the paper size) after it has been blocked ([L]).
Note: This also applies to the 2nd and 3rd Drawers.
PC1 is not blocked ([L]) even after the lapse of approx. 0.9 sec. after 1st
Drawer Paper Take-Up Sensor PC32 has been blocked ([L]).
PC1 is not blocked ([L]) even after the lapse of approx. 1.2 sec. after 2nd
Drawer Paper Take-Up Sensor PC33 has been blocked ([L]).
PC1 is not blocked ([L]) even after the lapse of approx. 1.5 sec. after 3rd
Drawer Paper Take-Up Sensor PC34 has been blocked ([L]).
PC1 is not blocked ([L]) even after the lapse of approx. 0.5 sec. after Man-
ual Feed Paper Take-Up Clutch CL1 has been energized (after one paper
take-up retry sequence).
PC2 is not blocked ([L]) even after the lapse of approx. 0.4 sec. after PC1
has been blocked ([L]).
S10 is not actuated even after the lapse of approx. 1.9 sec. after Synchro-
nizing Motor M5 has been energized.
PC11 is not blocked ([L]) even after the lapse of approx. 2.3 sec. after M5
has been energized.
S10 is not deactuated even after the lapse of approx. 2.0 sec. after PC2
has been unblocked ([H]) when the paper is fed out onto the Upper Exit
Tray.
T-10
Detection Timing
Detection Timing
Detection Timing
Detection Timing