Rom Version - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

Touch Panel Display

I.R. & EDH Check

EDH I/O Check

EDH Paper Passage

1155SBS050407A

7) ROM Version

Touch Panel Display

Tech. Rep. Mode

Checks each sensor used in the EDH and shows its status with either 0 or

1. With the EDH I/O check screen on the Touch Panel, directly activate or

deactivate each sensor.

2. The copier shows either 1 or 0 on a realtime basis.

Makes a paper passage check through the EDH in its different operating

1. Touch the desired sub-function key.

2. Press the Start key to start the check sequence.

Note: The copier automatically stops as soon as it completes the check

sequence. The Stop key may, however, be pressed to halt the

Tech. Rep. Mode

Displays the version of the current ROM.

Note: No versions are displayed if the system is not mounted with a ROM.

1. Touch [ROM version] to open the ROM Version screen.

2. The screen shows the ROM version.

Data Controller

I.R. & EDH Check

Table of Contents