4
USER'S CHOICE MODE
•
The User's Choice mode available through the Utility key is used to make various settings according
to the user's needs.
4-1. User's Choice Selection Screen
1155SBS0402A
4-2. User's Choice Function Setting Procedure
<Setting Procedures>
1. Press the Utility key on the control panel and then touch the "User's Choice" key.
2. Select the page number key that contains the desired function from among 1/6 through 6/6 shown
at the bottom of the Touch Panel.
3. Select the function to be set and make settings as required.
4. After the settings are complete, touch the "Enter" key to validate the settings.
Note: The function selected is highlighted.
<Exiting the Mode>
Perform any one of the following steps to go back to the Basic screen.
•
Press the Panel Reset key on the control panel.
•
Touch "Exit" on the Touch Panel.
1155S018CA
S-12