Exit Unit; Removal Of The Exit/Duplex Switching Unit - Minolta Di 620 Manual

2-11. EXIT UNIT

•

Removal of the Exit/Duplex Switching Unit

1. Remove the Rear Cover, Left Upper Cover and Left Rear Cover.
2. Unplug one connector.
3. Remove one screw and the ground wire.
4. Remove the harness from the cord clamps.
1155D112AA
5. Remove two screws and the cover of the Exit/Duplex
Switching Unit.
1155D113AC
6. Open the Exit/Duplex Switching Unit.
7. Remove the harness from the edge cover.
8. Remove one screw and holding bracket. Then, remove the
band from the Exit/Duplex Switching Unit.
9. Close the Exit/Duplex Switching Unit and remove one E-
ring from the unit mounting shaft.
10. Open and remove the Exit/Duplex Switching Unit.
1155D114AC
D-66