Removal Of The Suction Belts - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

12) Removal of the Suction Belts

1. Open the Front Lower Door.

2. Lower Lever M4 and slide out the Transport Tray Assy.

3. Remove Misfeed Clearing Knob M3.

4. Remove one screw and Lever M4.

5. Remove three screws and the Transport Unit cover.

6. Remove four screws and the Suction Unit.

At reinstallation, press the Suction Unit against the Suction Base Plate.

(Ensure that the bearing is properly aligned with the radius in the side plate.)

7. Remove the front and rear terminals. Free the Suction

Belts Driven Roller from the Suction Deck Frame to

remove the Suction Belts.

Table of Contents