Page 1
User Manual [ Advanced Operations ] Di2010f/Di2510f/Di3010f/Di3510f Read First Introduction Safety Information Precautions Auxiliary Functions Utility Mode Operations Configuring the Utilities and Fax Reports and Lists Administrator Management Operations Settings and FAX Items for the Administrator Appendix...
Warning For The Setting Of Header And Footer......2-7 IC CS-03-Telecommunication Devices ...........2-7 Laser Safety...................2-8 Internal Laser Radiation ..............2-8 CDRH Regulation................2-9 For European Users................2-9 For Denmark Users.................2-9 For Finland, Sweden Users.............2-9 For Norway Users .................2-10 Laser Safety Label ................2-11 Ozone Release ................2-11 Di2010f/Di2510f/Di3010f/Di3510f...
Page 3
Printing Multiple Copies of the Same Document Page on One Sheet ..................4-15 To make settings for the “Image Repeat” function ....... 4-15 “Distribution #” Function............4-17 Printing Distribution Numbers on Sets of Copies ......4-17 To make settings for the “Distribution #” function ......4-17 Di2010f/Di2510f/Di3010f/Di3510f...
Page 4
To set the “Default Copy Output Levels” function ......5-22 To set the “Printing Density” function ..........5-23 To set the “Output Priority” function ..........5-24 To set the “Intelligent Sorting” function .........5-25 To set the “Output Tray” function (optional) ........5-26 To set the ““Small” Originals” function...........5-28 Di2010f/Di2510f/Di3010f/Di3510f...
Page 5
How to Register Post Programs ........... 6-20 How to Register Polling Reception Programs ......6-22 How to Change or Delete a FAX Program ........6-24 Setting up Bulletin Boards ............6-25 How to Set up Bulletin Boards ............. 6-25 Di2010f/Di2510f/Di3010f/Di3510f...
Page 6
How to Output the Forwarding List..........7-19 Administrator Management Operations Administrator Management Screens...........8-2 To display the Administrator Management screens ......8-2 Initial Settings................8-4 Specify the date and time..............8-4 To set the date and time ..............8-4 Specify the time zone..............8-5 To set the time zone................8-5 Di2010f/Di2510f/Di3010f/Di3510f...
Page 7
Specifying Default Values for Quality and Mode when Transmitting ................. 9-14 Specifying the Default Transmission Settings ......9-17 Setting Memory Lock for Received Documents ..... 9-23 Setting Memory Lock and Batch Printing for Received Documents ................... 9-23 Manually Printing Received Faxes with Memory Lock ....9-26 Di2010f/Di2510f/Di3010f/Di3510f...
Page 8
Formats (Mode 016)..............9-59 Specifications for the Failure Report Image (Mode 023) ....9-60 Specifications for Incoming Fax Functions (Mode 030) ....9-60 Specifications for Cassette Selection with Incoming Faxes (Mode 037)..................9-61 Specifications for Set-up of Automatic Paper Feed after Copying (Mode 429) ...................9-62 Di2010f/Di2510f/Di3010f/Di3510f...
Page 9
Contents 10 Appendix 10.1 Specifications ................10-2 Di2010f/Di2510f/Di3010f/Di3510f ..........10-2 Duplexing Document Feeder AFR-19 .......... 10-4 Mixed Width Document Sizes............10-4 Duplex Unit AD-16................ 10-5 Switch back Unit SB-1 ..............10-5 Paper Feed Cabinet PF-124............10-5 2Way Paper Feed Cabinet PF-210 ..........10-6 Large Capacity Cabinet PF-122 ...........
Page 10
Read the User Manual: Fax Operations for the following items. 1 Before Using 2 Basic Transmission 3 Basic Reception 4 Using as a Telephone 5 Verification of Results 6 Transmitting Various Faxes 7 Receiving Various Faxes 8 Using the Document Functions 9 Appendix 10 Index Di2010f/Di2510f/Di3010f/Di3510f...
Here we will describe the precautions prior to use, the operation of the application functions, the functions used by administrators (utilities, administrator mode), troubleshooting, specifications, etc. User Manual: Fax Operations ❍ Here we will explain the operation of the fax functions. ❍ Read “Fax Operations” when using the fax function. Di2010f/Di2510f/Di3010f/Di3510f...
Text formatted in this style provides additional assistance. ➜ Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. Di2010f/Di2510f/Di3010f/Di3510f...
During printing, paper is supplied from the right side of the machine and fed into the output tray on top or the output option at the left with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below. Di2010f/Di2510f/Di3010f/Di3510f...
(X), the paper has a horizontal or landscape orientation, indicated by either “C” Portrait and Landscape Portrait With the “portrait” orientation, the paper is vertical, like a portrait. Landscape With the “landscape” orientation, the paper is horizontal, like a landscape. Di2010f/Di2510f/Di3010f/Di3510f...
1.3 Explanation of Basic Concepts and Symbols Display Icons Plain paper Thick paper Overhead projector transparencies Envelope Paper Supply Icons The icons shown below may appear, indicating that no more paper remains. The paper is empty. Di2010f/Di2510f/Di3010f/Di3510f...
Recycled Paper (USA market only) Your Minolta machine has been designed to use the following Recycled Paper. Minolta Recycled Bond: Item No. 8925 701 20% Post Consumer Waste...
Page 19
1.5 Recycled Paper (USA market only) Di2010f/Di2510f/Di3010f/Di3510f...
This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. Di2010f/Di2510f/Di3010f/Di3510f...
If you keep on using it as is, a fire or electrical shock could result. Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Di2010f/Di2510f/Di3010f/Di3510f...
Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. Di2010f/Di2510f/Di3010f/Di3510f...
• The cooling fan may be activated automatically, but this suggests no problems. • Ni-MH (Nickel Metal Hydride) Batteries are installed inside machine as back up mem- ory batteries. Please dispose according to local, state and federal regulations. PL 01 FAX Di2010f/Di2510f/Di3010f/Di3510f...
If they do, you will be given advance notice so as to give you an opportunity to maintain uninterrupted service. If you experience trouble with this equipment, please contact: Minolta Corporation 101 Williams Drive Ramsey. New Jersey 07446 U.S.A.
Ringer Equivalence Number of all the devices does not exceed five. If you experience trouble with this equipment, please contact: Minolta Business Equipment (Canada), Ltd. 369 Britannia Road E. Mississauga, Ontario L42 2H5...
Therefore, the print head unit should not be opened under any circumstances. Print Head Laser Aperture of the Print Head Unit There is a laser aperture at the location shown above, which must, however, NEVER be viewed directly by the user. Di2010f/Di2510f/Di3010f/Di3510f...
Undgå udsættelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene. Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 5mW og bølgelængden er 770-795 nm. For Finland, Sweden Users LOUKAN 1 LASERLAITE KLASS 1 LASER APPARAT Di2010f/Di2510f/Di3010f/Di3510f...
Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 5mW og bølgelengde er 770-795 nm. 2-10 Di2010f/Di2510f/Di3010f/Di3510f...
Pour avoir la certitude de travailler dans un environnement réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l’appareil. Di2010f/Di2510f/Di3010f/Di3510f 2-11...
EN 27779 is equal to or less than 70dB(A). Notice for Ni-MH Batteries Ni-MH (Nickel Metal Hydride) Batteries are installed inside machine as back up memory batteries. Please dispose according to local, state and federal regulations. 2-12 Di2010f/Di2510f/Di3010f/Di3510f...
A location that is not near any kind of heating devices Power Source The power source requirements are as follows. Voltage fluctuation: Maximum ±10% (127 V: +6%, –10%) Frequency fluctuation: Maximum ±3 Hz ❍ Use a power source with as little voltage or frequency fluctuations as possible. Di2010f/Di2510f/Di3010f/Di3510f...
51-3/4 (1312) (121) (324) 28 (710) (100) (328) 16-1/2 24-1/4 (422) (616) Unit: inch (mm) Note Be sure to allow a clearance of 4 in. (100 mm) or more at the back of this machine for the ventilation duct. Di2010f/Di2510f/Di3010f/Di3510f...
Always make sure that the machine’s power plug is visible and not hidden by the machine. ✚ Always unplug the machine from the electrical outlet if the unit is not to be used for a long period of time. ✚ Always provide good ventilation when making a large number of continuous copies. Di2010f/Di2510f/Di3010f/Di3510f...
Store in a sealed plastic bag in a cool, dark place paper that has been removed from its wrapper but not loaded into the machine. Only use toner that has been manufactured specifically for this machine. Never use other types of toner. Keep all supplies out of the reach of children. Di2010f/Di2510f/Di3010f/Di3510f...
Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading. Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. Di2010f/Di2510f/Di3010f/Di3510f...
Copyrighted works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. Di2010f/Di2510f/Di3010f/Di3510f...
Page 39
3.3 Legal Restrictions on Copying Di2010f/Di2510f/Di3010f/Di3510f...
Load paper for the cover pages with the same orientation and size as the paper for the document. The optional duplexing document feeder must be installed. Cover Mode settings Front Cover: Blank Original Document Copy Back Cover: None Front Cover: Blank Back Cover: Blank Front Cover: Blank Back Cover: With Image Di2010f/Di2510f/Di3010f/Di3510f...
Front Cover: With Image Back Cover: Blank Front Cover: With Image Back Cover: With Image To make settings for the “Cover Mode” function Load the document into the duplexing document feeder. Press the [Copy] key. Touch [Auxiliary], and then touch [Cover Mode]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 43
“Cover Paper”. Select the paper drawer that contains the paper for the cover pages, and then touch [Enter]. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2010f/Di2510f/Di3010f/Di3510f...
This function can be used together with the “Cover Mode” function. This function cannot be used together with booklet-printing and mixed original sizes. Note The optional duplexing document feeder must be installed. Paper Insertion settings Blank With Image Di2010f/Di2510f/Di3010f/Di3510f...
Touch [Auxiliary], and then touch [Page Insertion]. Select either the [With Image] or the [Blank] Page Insertion setting, and then touch the button below “Insert Paper”. Select the paper drawer that contains the paper for the interleaves, and then touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 46
4.2 “Page Insertion” Function Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2010f/Di2510f/Di3010f/Di3510f...
When copying overhead projector transparencies, paper (interleaves) can be in- serted between copies of the transparencies. Load the paper for the interleaves into a paper drawer, and load the overhead projector transparencies into the multiple bypass tray. OHP Interleaving settings Blank With Image Di2010f/Di2510f/Di3010f/Di3510f...
Touch [Auxiliary], and then touch [OHP Interleaving]. Select either the [With Image] or the [Blank] OHP Interleaving setting, and then touch the button below “Insert Paper”. Select the paper drawer that contains the paper for the transparency interleaves, and then touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 49
4.3 “OHP Interleaving” Function Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. 4-10 Di2010f/Di2510f/Di3010f/Di3510f...
To make settings for the “File Margin” function Load the document into the duplexing document feeder or position it on the original glass. Press the [Copy] key. Touch [Auxiliary], and then touch [File Margin]. Di2010f/Di2510f/Di3010f/Di3510f 4-11...
Page 51
Touch to specify the width of the binding margin, and then touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. 4-12 Di2010f/Di2510f/Di3010f/Di3510f...
When copying documents with punch holes, the pages can be printed with part of the document erased. Edge/Frame Erase settings The left side of the document is Original erased. Document Copy The top edge of the document is erased. A frame around the document is erased. Di2010f/Di2510f/Di3010f/Di3510f 4-13...
[Edge/Frame Erase]. Select the desired Edge/Frame Erase setting. Touch to specify the width of the erased area, and then touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. 4-14 Di2010f/Di2510f/Di3010f/Di3510f...
To make settings for the “Image Repeat” function Load the document into the duplexing document feeder or position it on the original glass. Press the [Copy] key. Touch [Auxiliary], and then touch [Image Repeat]. Di2010f/Di2510f/Di3010f/Di3510f 4-15...
Page 55
Y for the paper that is loaded. ❍ Touch until the cursor moves below the fraction that you wish to change. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. 4-16 Di2010f/Di2510f/Di3010f/Di3510f...
After “999” is printed, the number returns to “000”. To make settings for the “Distribution #” function Load the document into the duplexing document feeder or position it on the original glass. Press the [Copy] key. Touch [Auxiliary], and then touch [Image Settings]. Touch [Distribution #]. Di2010f/Di2510f/Di3010f/Di3510f 4-17...
Page 57
❍ Touch [Darker], [Normal] or [Lighter] to specify the print density for the distribution number. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. 4-18 Di2010f/Di2510f/Di3010f/Di3510f...
Copies can be printed with a watermark added to the background. To make settings for the “Watermark” function Load the document into the duplexing document feeder or position it on the original glass. Press the [Copy] key. Touch [Auxiliary], and then touch [Image Settings]. Touch [Watermark]. Di2010f/Di2510f/Di3010f/Di3510f 4-19...
Page 59
❍ If [All Pages] is selected, the watermark is printed on all pages. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. 4-20 Di2010f/Di2510f/Di3010f/Di3510f...
The optional hard disk must be installed. To make copies using the “Image Stamping” function Load the document into the duplexing document feeder or position it on the glass. Press the [Copy] key. Touch [Auxiliary], and then touch [Image Settings]. Touch [Image Stamping]. Di2010f/Di2510f/Di3010f/Di3510f 4-21...
Page 61
❍ If [All Pages] is selected, the image is printed on all pages. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. 4-22 Di2010f/Di2510f/Di3010f/Di3510f...
To set the “Black-White Reverse” function Load the document into the duplexing document feeder or position it on the original glass. Press the [Copy] key. Touch [Auxiliary], and then touch [Black-White Reverse]. Press the [Start] key. The copies are printed. Di2010f/Di2510f/Di3010f/Di3510f 4-23...
After the first document batch is scanned, load the second document batch into the duplexing document feeder or position it on the original glass, and then press the [Start] key. After all document batches have been scanned, touch [Finish]. Press the [Start] key. The copies are printed. 4-24 Di2010f/Di2510f/Di3010f/Di3510f...
This screen appears when the [Utility] key is pressed. The following screens appear when the corresponding button is touched. User Set-up Screen Making changes in the initial screen of the machine, as well as registering and set- ting up functions for the FAX. Di2010f/Di2510f/Di3010f/Di3510f...
5.1 Utility Mode Screens Meter Count screen This screen shows the total number of copies printed since the machine was in- stalled. Copy Job Program Recall screen From this screen, a programmed copy job can be recalled. Di2010f/Di2510f/Di3010f/Di3510f...
2. The administrator access code must be entered before these screens can be displayed. For details on the functions available from the Administrator Management screens, refer to “8 Administrator Management Operations” and “9 Setting and FAX Items for the Administrator”. Di2010f/Di2510f/Di3010f/Di3510f...
Default Copy Output Levels Auto (Lighter, Normal, Darker) Manual One of nine settings between “Lighter” and “Darker” can be selected. Printing Density -2, -1, 0, 1, 2 Output Priority Non-Sort, Sort, Group, Corner Staple*, 2-Point Staple*, Hole Punch* *Options Di2010f/Di2510f/Di3010f/Di3510f...
Page 69
Specify the time for dehumidifying the scanner. Crease/Center Staple Crease (-10 to +10, 0) Center staple (-10 to +10, 0) Priority Default Device Copier, FAX, Auto Screen Property Priority FAX One-Touch, Search, 10-key Dialing, Index Screen Density (ADF only) Mode 1, Mode 2 Di2010f/Di2510f/Di3010f/Di3510f...
If [ON] is selected, the previously copied image data can be printed again, even after copying has finished or while the copier is stand-by. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f...
Touch [User Set], and then touch [User’s Choice]. Touch [1/6], and then touch [Mixed Original Detection]. Touch [ON] or [OFF], and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f...
Select the desired language, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. For details on changing the setting for the communication language, refer to p. 9-3. Di2010f/Di2510f/Di3010f/Di3510f...
Touch [User Set], and then touch [User’s Choice]. Touch [2/6], and then touch [Original Ö Copy Default]. Select the desired setting, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-10 Di2010f/Di2510f/Di3010f/Di3510f...
Touch [User Set], and then touch [User’s Choice]. Touch [2/6], and then touch [Auto Paper/Auto Size]. Select the desired setting, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-11...
Touch [User Set], and then touch [User’s Choice]. Touch [2/6], and then touch [Drawer Priority]. Select the desired paper drawer, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-12 Di2010f/Di2510f/Di3010f/Di3510f...
Selecting this mode will mean that double sided copies on paper in that paper tray will not be possible. ❍ : Special paper Selecting this mode will mean that when using auto paper selection, this will not be included in auto tray change. Di2010f/Di2510f/Di3010f/Di3510f 5-13...
Touch [ON] or [OFF], and then touch [Enter]. ❍ If [OFF] is selected, specify the Zoom settings for the 2in1 and 4in1 Copy settings. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-14 Di2010f/Di2510f/Di3010f/Di3510f...
Use the 10-Key Pad to specify the desired length of time, and then touch [Enter]. (Specify a length of time between 1 and 240 minutes.) Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-15...
(Specify a length of time between 1 and 240 minutes.) ❍ Selecting the [No Reset] key means that sleep functions will no longer operate. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-16 Di2010f/Di2510f/Di3010f/Di3510f...
LCD Back-light being set to off, then the Backlight will be turned off after the specified preheat or sleep time. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-17...
The length of time until the Basics screen is displayed can be set to 30 seconds, 1, 2, 3 or 5 minutes, or [No Reset]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-18 Di2010f/Di2510f/Di3010f/Di3510f...
Touch [User Set], and then touch [User’s Choice]. Touch [3/6], and then touch [Plug- In Counter, ID key Reset]. Touch [ON] or [OFF], and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-19...
Touch [4/6], and then touch [4in1 Copy Order]. Select the page orientation for making 4in1 copies, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-20 Di2010f/Di2510f/Di3010f/Di3510f...
[Auto] or [Manual]. ❍ The default Original Image Type can be set to [Text], [Photo] or [Text/Photo]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-21...
[Lighter], [Normal] or [Darker]. ❍ The default Manual density level can be adjusted by one level at a time. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-22 Di2010f/Di2510f/Di3010f/Di3510f...
Touch [User Set], and then touch [User’s Choice]. Touch [4/6], and then touch [Printing Density]. Select the desired settings, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-23...
Touch [User Set], and then touch [User’s Choice]. Touch [4/6], and then touch [Output Priority]. Select the desired settings, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-24 Di2010f/Di2510f/Di3010f/Di3510f...
“Sort” setting is automatically selected when a document consisting of two or more pages is placed in the duplexing document feeder. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-25...
To specify the output tray for received faxes, touch [Recept Print]. ❍ To specify the output tray for copies and computer printouts, touch [Copier/Printer]. If you use the optional multi port, you can specify output bins for each port. 5-26 Di2010f/Di2510f/Di3010f/Di3510f...
Page 90
Select the appropriate output tray settings, and then touch [Enter]. ❍ <After touching [Recept Print]> ❍ <If the multi port is installed> ❍ <After touching [Copier/Printer]> Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-27...
❍ If [OFF] is selected, a message appears, indicating that the paper should be selected. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-28 Di2010f/Di2510f/Di3010f/Di3510f...
[Enter]. ❍ Specify the time in the 24-hour format. ❍ To erase the value, press the [C] key. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-29...
Touch [User Set], and then touch [User’s Choice]. Touch [5/6], and then touch [Crease/Center Staple]. Touch to adjust the setting, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-30 Di2010f/Di2510f/Di3010f/Di3510f...
[Fax/Scan] button is pressed on the Priority Fax Screen. Press the [Utility] key. Touch [User Set], and then touch [User’s Choice]. Select the [6/6] tab, and then touch [Priority Screen]. Touch [Default Device Priority] or [Priority FAX Screen] key. Di2010f/Di2510f/Di3010f/Di3510f 5-31...
Page 95
5.3 Changing Default Settings Select the desired screen from the display, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basic screen. 5-32 Di2010f/Di2510f/Di3010f/Di3510f...
(such as those created with a word processor). 2: The setting on the right is most appropriate for scanning faint document (such as those written with pencil). Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-33...
A maximum of five images can be registered. For details on using the “Im- age Stamping” function, refer to ““Image Stamping” Function” on page 4-21. Note The optional hard disk must be installed. To register an image stamp Press the [Utility] key. Touch [User Set]. Touch [Image Mem. Input]. 5-34 Di2010f/Di2510f/Di3010f/Di3510f...
Page 98
Touch Then, touch select the length of side Y for the image document (between 1 inch and 11-11/16 inch). ❍ Touch until the cursor moves below the fraction that you wish to change. Touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 5-35...
Page 99
5.4 Registering an Image Stamp Position the document on the glass, and then select the orientation of the document. Press the [Start] key. The image is scanned. The image stamp is registered. 5-36 Di2010f/Di2510f/Di3010f/Di3510f...
To view the counters Press the [Utility] key. Touch [Meter Count]. After checking the various counters, touch [Exit]. ❍ There are two Meter Count screens. To view the other screen, touch [Next]. Touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-37...
Number buttons on which does not appear have already been assigned a copy program. If a button that has already been programmed is selected, the previously assigned copy program is deleted. Touch [Check], and then touch a number button. 5-38 Di2010f/Di2510f/Di3010f/Di3510f...
Page 102
5.6 Using Copy Programs Check the programmed settings. ❍ To display screen 2/2, touch [Next]. To return to screen 1/2, touch [Back]. Touch [Enter] to return to the Mode Check screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 5-39...
Touch [Job Mem Input]. Touch [Delete], and then touch number to delete. ❍ The copy program is deleted, appears on the button. Touch [Exit] to return to the Mode Check screen, and then touch [Exit] to return to the Basics screen. 5-40 Di2010f/Di2510f/Di3010f/Di3510f...
Touch the button assigned with the copy program that you wish to use. ❍ Only buttons that have been assigned a copy program are displayed. Check the settings, and then touch [Enter]. Set the document, and press the [Start] key. Di2010f/Di2510f/Di3010f/Di3510f 5-41...
(Default setting: 3) ✔ [Line Monitor volume]: This function is used to adjust the volume of the telephone line that can be heard through the speaker. (Initial value: 3) 5-42 Di2010f/Di2510f/Di3010f/Di3510f...
To clean the touch panel (“Panel Cleaning” function) By setting panel cleaning, you can clean the panel without accidentally pressing panel buttons. Press the [Utility] key. Touch [User Management], and then touch [Panel Cleaning]. ❍ To cancel the function, press the [Panel Reset] key. Di2010f/Di2510f/Di3010f/Di3510f 5-43...
If this occurs, toner can be replenished. Press the [Utility] key. Touch [User Management], and then touch [Toner Replenisher]. The toner is replenished. 5-44 Di2010f/Di2510f/Di3010f/Di3510f...
Registering an index allows you to group one-touch keys. Up to 15 recipients can be registered to each index key. How to Register Indexes Press the [Utility] key. After touching [User Set], touch [FAX Input]. Touch [Index]. Select the index key to be registered. Di2010f/Di2510f/Di3010f/Di3510f...
Perform steps 1 to 4 in “How to Register Indexes” on page 6-2. Select the index key to be changed. Use the left and right arrow keys to the characters you want to change and touch [Del.]. Enter the new index name. Touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f...
Perform steps 1 to 4 in “How to Register Indexes” on page 6-2. Select the index key to be deleted. Use the [C] key to delete the index name. Touch [Enter]. Note When an index is deleted, the one-touch keys registered in that index are not deleted. Di2010f/Di2510f/Di3010f/Di3510f...
Type in the F code (SEP). F-CODE (SID/PWD) Type in the F code (SID/PWD). One-Touch One-Touch Copy The selected one-touch key can be copied. How to Register One-Touch Keys Press the [Utility] key. After touching [User Set], touch [FAX Input]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 113
Touch screen is displayed. Enter the recipient’s name to display on the one-touch key, and touch [Next]. ❍ See “Character Input and Registration” on page 6-33 for instructions on character input. ❍ Up to 12 characters may be input. Di2010f/Di2510f/Di3010f/Di3510f...
Page 114
If the multi-port option is not installed, the [G3] key displays. Enter the recipient’s telephone name with the 10-Key Pad, and touch [Next]. ❍ Touch [Pause] to allow a wait time of about 3 seconds. After verifying the entered information, touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f...
6.2 One-Touch Dial Number Registration Registering Overseas Recipients Perform steps 1 to 7 in “How to Register One-Touch Keys” on page 6-5. Enter the recipient’s telephone number with the 10-Key Pad, and touch [Overseas]. Touch [Next]. After verifying the registration information, touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f...
Refer to “User Manual: FAX Operation, Using the Document Function, Concerning F-CODEs” for details on F-CODEs. Enter the F-CODE with the 10-Key Pad, and touch [Enter]. Touch [Enter], and then [Next] in the next screen. After verifying the registration information, touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f...
Perform steps 1 to 7 in “How to Register One-Touch Keys” on page 6-5. Enter the recipient’s telephone number with the 10-Key Pad, and touch [Speed]. Select the communication speed with the keys, and touch [Enter]. Touch [Next]. After verifying the registration information, touch [Enter]. 6-10 Di2010f/Di2510f/Di3010f/Di3510f...
Perform steps 1 to 3 “How to Register One-Touch Keys” on page 6-5. Press the one-touch key you want to change or delete. Select the key for the item you want to change and change the information. To delete, touch [Delete]. After verifying the registration information, touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 6-11...
Perform steps 1 through 3 of the procedure “How to Register One-Touch Keys” on page 6-5, and then select the one-touch key to be copied. Select the one-touch key to be copied from the One-Touch screen, and touch [One-Touch Copy]. Touch the key you want to copy from. 6-12 Di2010f/Di2510f/Di3010f/Di3510f...
Page 120
6.2 One-Touch Dial Number Registration After verifying the copy operation, touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 6-13...
A total of 540 FAX and one-touch keys can also be registered. In order to specify a recipient for a FAX program, the recipient must have been registered as a one-touch key in advance. (For details, refer to page 6-5.) 6-14 Di2010f/Di2510f/Di3010f/Di3510f...
6.3 FAX Program Registration Registering Transmission Programs How to Register FAX Programs Press the [Utility] key. After touching [User Set], touch [FAX Input]. Touch [FAX Program]. Di2010f/Di2510f/Di3010f/Di3510f 6-15...
Page 123
Enter the program name to display on the FAX program key, and touch [Next]. ❍ See “Character Input and Registration” on page 6-33 for instructions on character input. ❍ Up to 12 characters may be input. 6-16 Di2010f/Di2510f/Di3010f/Di3510f...
Page 124
[Enter]. ❍ To register a sequential data transmission, designate all transmission destinations. Up to a maximum of 300 destinations can be specified. ❍ If the desired destination is not registered, touch [No Dest.]. Touch [Next]. Touch [Transmission Setting]. Di2010f/Di2510f/Di3010f/Di3510f 6-17...
Page 125
Only one destination can be designated with real-time transmission. If more are designated, real-time transmission will be cancelled. This is also true for Priority TX (prioritized transmission). The zoom is set to auto for 2 in 1 transmission. After selecting all the desired functions, touch [Enter]. 6-18 Di2010f/Di2510f/Di3010f/Di3510f...
Page 126
6.3 FAX Program Registration After verifying the entered information, touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 6-19...
(Use 24-hour notation (military time) to enter the hour.) ❍ Touch [Minute], and enter using the 10-Key Pad. ❍ Touch [Every Hours], and enter using the 10-Key Pad. (Specify how often to transmit using an interval from 01 to 24.) 6-20 Di2010f/Di2510f/Di3010f/Di3510f...
Page 128
- TX Report - 2 in 1 - 2-Sided TX - Rotation TX - TX Marker - Password TX Note The zoom is set to auto for 2 in 1 transmission. After selecting all the desired functions, touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 6-21...
[Next]. Designate the destination. ❍ To use a one-touch key, press the [One-Touch] key for the destination, and then touch [Enter]. ❍ To using a name search, touch [Search], specify the destination, and then touch [Enter]. Touch [Next]. 6-22 Di2010f/Di2510f/Di3010f/Di3510f...
Page 130
10-Key Pad. (Use 24-hour notation (military time) to enter the hour.) ❍ Touch [Minute], and enter using the 10-Key Pad. ❍ Touch [No Setting] when not designating a time. Touch [Enter]. After verifying the entered information, touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 6-23...
Select the key for the item you want to change and change the information. ❍ Touch [Delete] to delete the program. Note If the program type is changed, the registered contents of the program are deleted. When [Delete] is touched, a confirmation screen displays. Touch [Yes] to delete. Touch [Enter]. 6-24 Di2010f/Di2510f/Di3010f/Di3510f...
This sets whether a password is required to read text on a bulletin board. The initial value is [No]. For details on using the bulletin boards, refer to “Using the Document Functions” in the Fax Operations volume. Press the [Utility] key. After touching [User Set], touch [FAX Input]. Di2010f/Di2510f/Di3010f/Di3510f 6-25...
Page 133
6.4 Setting up Bulletin Boards Touch [Bultn. Board]. Select the desired bulletin board number. Touch the key for the bulletin board you want to register. 6-26 Di2010f/Di2510f/Di3010f/Di3510f...
Page 134
[←] and [→] arrows to move the cursor and input, or press the [C] key and re-input. When [Delete] is touched, the character on the cursor is deleted. When [Cancel] is touched, the screen returns to the state before registration began. Di2010f/Di2510f/Di3010f/Di3510f 6-27...
Page 135
6.4 Setting up Bulletin Boards The [Remote Output Check] is set the same way. After verifying the entered information, touch [Enter]. 6-28 Di2010f/Di2510f/Di3010f/Di3510f...
Up to 20 characters may be entered consisting of 0 to 9, # and Remote Input Check This sets whether a password is required to receive documents in the confidential box. The initial value is [No]. Press the [Utility] key. Touch [User Set], and then touch [User’s Choice]. Di2010f/Di2510f/Di3010f/Di3510f 6-29...
Page 137
6.5 Registering Confidential Boxes Touch [Conf. Box]. Select the confidential box. Touch the key for the box you want to register. 6-30 Di2010f/Di2510f/Di3010f/Di3510f...
Page 138
[←] and [→] arrows to move the cursor and input, or press the [C] key and re-input. When [Delete] is touched, the character on the cursor is deleted. When [Cancel] is touched, the screen returns to the state before registration began. Di2010f/Di2510f/Di3010f/Di3510f 6-31...
Page 139
6.5 Registering Confidential Boxes After verifying the entered information, touch [Enter]. To continue registering confi- dential boxes, repeat steps 4 to 7. 6-32 Di2010f/Di2510f/Di3010f/Di3510f...
These keys move the cursor to the left and right within the character display area. Delete key This deletes the character at the cursor position. Input mode key Displays the current input mode. Press this key to select a different character input mode. Di2010f/Di2510f/Di3010f/Di3510f 6-33...
[Del.], and enter the correct characters. ❍ To switch between capital and small letters, touch [Caps]. When the [Caps] key is ON, it is displayed as reversed video (white letters on a black background). 6-34 Di2010f/Di2510f/Di3010f/Di3510f...
Double check to make sure the characters displayed in the character display area are correct. ❍ To correct inputted characters, move the cursor to the desired position with the [←] and [→] keys, delete using the [Del.], and enter the correct characters. Di2010f/Di2510f/Di3010f/Di3510f 6-35...
Page 143
6.6 Character Input and Registration 6-36 Di2010f/Di2510f/Di3010f/Di3510f...
Outputs department information that has been set up. Settings Lists* Outputs details of the settings for different functions. Forwarding List* Outputs the conditions for forwarding. * This can be confirmed by outputting an administrator report. However, this can only be carried out by an administrator. Di2010f/Di2510f/Di3010f/Di3510f...
How to Output Transmission Activity Reports Press the [Utility] key. Touch [Reports]. Touch [TX Act. Report]. The TX Activity Report is printed out. Di2010f/Di2510f/Di3010f/Di3510f...
Page 147
The destination is unable to receive. The destination does not answer the telephone. INTERR Communications are suspended. F.MEM The memory is full. Communications with all destinations were unsuccessful. PT.DEL Some communications were unsuccessful. IMG NG Communication quality of image is coarse. Di2010f/Di2510f/Di3010f/Di3510f...
How to Output Receiving Activity Reports Press the [Utility] key. Touch [Reports]. Touch [RX Act. Report]. The RX Activity Report is printed out. Di2010f/Di2510f/Di3010f/Di3510f...
Page 149
The destination is unable to receive. The destination does not answer the telephone. INTERR Communications are suspended. F.MEM The memory is full. Communications with the destinations was unsuccessful. B.PRT Under printing IMG NG Communication quality of image is coarse. Di2010f/Di2510f/Di3010f/Di3510f...
Confirming the Information Registered to One- Touch Dial Keys The destinations registered to one-touch dial keys can be outputted for verification. How to Output One-Touch Lists Press the [Utility] key. Touch [Reports]. Touch [One-Touch List]. The One-Touch List is printed out. Di2010f/Di2510f/Di3010f/Di3510f...
Page 151
7.4 Confirming the Information Registered to One-Touch Dial Keys List Details Di2010f/Di2510f/Di3010f/Di3510f...
Confirming the Contents Registered to FAX Pro- grams The contents of transmission settings registered to one-touch programs (FAX pro- grams) is output in a list for verification. How to Output FAX Program Lists Press the [Utility] key. Touch [Reports]. Touch [FAX Program List]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 153
7.5 Confirming the Contents Registered to FAX Programs Select the FAX program key you want to print out. The FAX Program List is printed out. List Details TSI Date and Time of Report Details of communications settings registared in the facsimile programs 7-10 Di2010f/Di2510f/Di3010f/Di3510f...
Confirming Text Registered to Bulletin Boards Text registered to the bulletin boards can be outputted for verification. How to Output the Bulletin Board List Press the [Utility] key. Touch [Reports]. Touch [Bulletin Board List]. The Bulletin Board List is printed out. Di2010f/Di2510f/Di3010f/Di3510f 7-11...
Page 155
7.6 Confirming Text Registered to Bulletin Boards List Details Date and Time of Report Title of the Registered Date and Time of Document Document Registration 7-12 Di2010f/Di2510f/Di3010f/Di3510f...
Confirming the Contents Registered to Confidential Boxes Outputs the contents registered to the confidential boxes in a list. How to Output the Confidential List Press the [Utility] key. Touch [Reports]. Touch [Confidential List]. The Confidential List is printed out. Di2010f/Di2510f/Di3010f/Di3510f 7-13...
Page 157
7.7 Confirming the Contents Registered to Confidential Boxes List Details Date and Time of Report 7-14 Di2010f/Di2510f/Di3010f/Di3510f...
Management 1], and then touch [Rep. Print]. Touch either [Account List]. The account list is printed. Note If the “Copy Track Mode” pa- rameter on the “Copy Track” screen is set to “No”, only [Set- ting List] and [Forward List] will appear. Di2010f/Di2510f/Di3010f/Di3510f 7-15...
Page 159
7.8 Checking Account Information List Details 7-16 Di2010f/Di2510f/Di3010f/Di3510f...
Only an administrator can output the Settings List. How to Output the Setting List Press the [Utility] key. Touch [Administrator Management] and input the password. Touch [Administrator Management 1], and then touch [Rep. Print]. Touch [Setting List]. The Setting List is printed out. Di2010f/Di2510f/Di3010f/Di3510f 7-17...
Page 161
7.9 Confirming the Settings of Various Functions List Details 7-18 Di2010f/Di2510f/Di3010f/Di3510f...
Only an administrator can output the Forwarding List. How to Output the Forwarding List Press the [Utility] key. Touch [Administrator Management] and input the password. Touch [Administrator Management 1], and then touch [Rep. Print]. Touch [Forward List]. The Forwarding List is printed out. Di2010f/Di2510f/Di3010f/Di3510f 7-19...
Page 163
7.10 Confirming the Conditions for Forwarding List Details 7-20 Di2010f/Di2510f/Di3010f/Di3510f...
Use the 10-Key Pad to type in the administrator access code, and then touch [Enter]. ❍ If no administrator access code is programmed, touch [Enter] to display the Administrator Management screen. Touch [Admin. 1] or [Admin. 2] to display the desired screen. Di2010f/Di2510f/Di3010f/Di3510f...
Page 166
Note When specifying [1000 Accounts] or [OFF] in the account management mode, neither the [Account Reg] nor the [Account Counter] keys will be dis- played. Refer to “To set the Account Management Mode” on page 8-11 for details. Di2010f/Di2510f/Di3010f/Di3510f...
To set the date and time Follow the procedure described in “To display the Administrator Management screens” on page 8-2 to display the Administrator Management screen. Touch [Admin. 1], and then touch [Initial Settings]. Touch [Date/Time Set]. Touch [TimeDate]. Di2010f/Di2510f/Di3010f/Di3510f...
To set the time zone Follow the procedure described in “To display the Administrator Management screens” on page 8-2 to display the Administrator Management screen. Touch [Admin. 1], and then touch [Initial Settings]. Touch [Date/Time Set]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 169
Touch [TimeZone]. Touch to adjust the setting, and then touch [Enter]. ❍ The time difference can be adjusted in 30-minute intervals. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f...
[Delete]. ❍ Press the [C] key to erase all entered text. ❍ To return to the previous screen, touch [Cancel]. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f...
Use the 10-Key Pad to specify the maximum number of copies, and then touch [Enter]. ❍ Numbers between 1 and 99 can be specified. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f...
“Sleep Mode Setting” function, which is available from the User’s Choice screen. On the User’s Choice [3/6] sleep mode setting screen, select [No]. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f...
Total counter: displays the total counter value for each account. Additionally, clears the counter value [1000 Accounts] Enter the account number to make copies. Additionally, the following can be configured per account. ❍ Total counter: displays the total counter value for each account. Additionally, clears the counter value 8-10 Di2010f/Di2510f/Di3010f/Di3510f...
Select [Yes], and touch [Enter]. Note When programming or chang- ing account information data, please set the default account information data. However, de- pending on the currently spec- ified account information method, the default screen may not be displayed. Di2010f/Di2510f/Di3010f/Di3510f 8-11...
Page 175
Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Note Only when setting [100 Accounts 1] or [100 Accounts 2], will the [Account Reg] or the [Account Counter] be displayed on the Admin.1 screen. 8-12 Di2010f/Di2510f/Di3010f/Di3510f...
Set Letter L paper in the 1st paper drawer, then press the [Start] key. Account management data is printed. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 8-13...
[Interrupt] key. If you wish to clear the total counter of other accounts, re- peat steps 4 and 5. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 8-14 Di2010f/Di2510f/Di3010f/Di3510f...
[C] key. Use the 10-Key Pad to type in the value you wish to change. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 8-15...
Follow the procedure described in “To display the Administrator Management screens” on page 8-2 to display the Administrator Management screen. Touch [Admin. 1], and touch [Account Reg]. Select the account key to program or change. Touch [Account Name]. 8-16 Di2010f/Di2510f/Di3010f/Di3510f...
Page 180
Touch [Enter]. Touch [Access Number], and enter the access code for the account. Touch [Enter]. Touch [Account Number], and enter the account number using the 10-Key Pad. Touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 8-17...
Page 181
Where you wish to change the programmed details, repeat from step 3, en- tering the correct details. To delete programmed details, at step 4, press the [Delete] key. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 8-18 Di2010f/Di2510f/Di3010f/Di3510f...
Touch the button for the account whose counter you wish to view, and then touch [Enter]. After checking the counter, then touch [Enter]. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010f/Di2510f/Di3010f/Di3510f 8-19...
10-Key Pad, and touch [Enter]. ❍ If there is no administrator number registered, touch [Enter] to proceed to the next screen. Select [Admin. 1] or [Admin. 2]. Select the function to register or set from the next screen. Di2010f/Di2510f/Di3010f/Di3510f...
Sets the language (English or other language) used for the TSI name and for re- ports. How to Set the Communication Language Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1] key, and then touch [Initial Settings]. Touch [Language (Com.)]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 187
9.2 Setting the Language for the TSI Name and Reports Select [English] or other language, and touch [Enter]. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. Di2010f/Di2510f/Di3010f/Di3510f...
This section describes the procedure for setting up the FAX telephone number, PSTN/ext line option and the line type. Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [Initial Settings]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 189
❍ Touching [Cancel] returns the screen to the state before registration began. ❍ To register the country code (for example, for the US), press the [+] and enter the US code “1”. Touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 190
❍ Internal (Extension): Select when connected to a general subscriber phone line through a PBX. ❍ If you select [Extension], input the external access number (the number used to get out), and touch [Enter]. Touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 191
10 pps line. ❍ PB: Select if using a push button line. Touch [Enter]. After verifying the entered information, touch [Enter]. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. Di2010f/Di2510f/Di3010f/Di3510f...
The TSI name can be changed using the same procedure as used for registra- tion. How to Register and Change TSI Names Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [Initial Settings]. Di2010f/Di2510f/Di3010f/Di3510f...
Page 193
See “Character Input and Registration” on page 6-33 for instructions on character input. After verifying the registration information, touch [Enter]. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. 9-10 Di2010f/Di2510f/Di3010f/Di3510f...
In that case, the FAX telephone number that you registered will be displayed. How to Register and Change the FAX ID Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [Initial Settings]. Di2010f/Di2510f/Di3010f/Di3510f 9-11...
Page 195
Enter the ID and touch [Enter]. ❍ See “Character Input and Registration” on page 6-33 for instructions on character input. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. 9-12 Di2010f/Di2510f/Di3010f/Di3510f...
Rotation transmission Sets whether to return to rotation transmission or not after each operation. The default value from the factory is “ON”. Two-sided Sets the margin for two-sided transmissions. transmission The default value from the factory is “OFF”. Di2010f/Di2510f/Di3010f/Di3510f 9-13...
To change so that you make settings per transmission, refer to “Basic Transmission” in the “Fax Operations” volume. Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [TX Settings]. Touch [Quality/Mode]. 9-14 Di2010f/Di2510f/Di3010f/Di3510f...
Page 198
9.6 Transmission Settings ❍ To set the default quality: Touch [Priority Quality]. Select the default quality value, and touch [Enter]. ❍ To set the contrast: Touch [Priority Contrast]. Select the default density value, and touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 9-15...
Page 199
Keys [G3-1] and [G3-2] display when the multi-port option is installed. If the multi-port option is not installed, the [G3] key displays. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. 9-16 Di2010f/Di2510f/Di3010f/Di3510f...
9.6 Transmission Settings Specifying the Default Transmission Settings Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [TX Settings]. Touch [Com. Menu]. Di2010f/Di2510f/Di3010f/Di3510f 9-17...
Page 201
9.6 Transmission Settings ❍ To set the default transmission method: Touch [TX]. Select the default transmission mode setting, and touch [Enter]. 9-18 Di2010f/Di2510f/Di3010f/Di3510f...
Page 202
9.6 Transmission Settings ❍ To set the default TSI position: Touch [TSI]. Touch [TSI Position]. Select the default value for the position of the TSI name on transmitted originals, and touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 9-19...
Page 203
9.6 Transmission Settings ❍ To set the default TSI selection: Touch [TSI]. Touch [TSI Selection]. Select the default TSI name, and touch [Enter]. 9-20 Di2010f/Di2510f/Di3010f/Di3510f...
Page 204
9.6 Transmission Settings ❍ To set the rotation transmission default: Touch [Rotation TX]. Select either [ON] or [OFF], and touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 9-21...
Page 205
To set the two-sided transmission default: Touch [2-Sided TX] key. Select the default margin for two-sided transmissions, and touch [Enter] key. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. 9-22 Di2010f/Di2510f/Di3010f/Di3510f...
“Print Control Password” has been set, printing can be started without entering a password. Setting Memory Lock and Batch Printing for Received Documents Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1] key, and then touch [RX Settings]. Di2010f/Di2510f/Di3010f/Di3510f 9-23...
Page 207
9.7 Setting Memory Lock for Received Documents Touch [Memory Lock]. Touch [Memory Lock On/Off]. Select the days of the week to set the time to. Note Be sure to select the days of the week. 9-24 Di2010f/Di2510f/Di3010f/Di3510f...
Page 208
Differ- ent times cannot be set for dif- ferent days. Also, the start time and stop time cannot be identical. Touch [Enter]. ❍ It is possible to disable the settings by touching [Cancel]. Touch [Memory Lock Password]. Di2010f/Di2510f/Di3010f/Di3510f 9-25...
When [Cancel] is touched, the screen returns to the state before registration began. Touch [Enter]. Touch [Enter] until you return to the main screen. Manually Printing Received Faxes with Memory Lock Press the [Utility] key. Touch [User Management]. Touch [Print Management]. 9-26 Di2010f/Di2510f/Di3010f/Di3510f...
Page 210
❍ To stop the printing after it has started, touch [Lock On]. Touch [Temp. Print] is start printing again. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. Di2010f/Di2510f/Di3010f/Di3510f 9-27...
The default is “1” ring. How to Set the Receiving Functions Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [FAX Setting]. Touch [RX Functions]. 9-28 Di2010f/Di2510f/Di3010f/Di3510f...
Page 212
If you select [Auto], set the [No. of RX Call Rings] as well. (To step 6) ❍ Manual: Select for manual reception. See “User Manual: FAX Operation, Basic RX” for instructions on manual reception. Touch [No. of RX Call Rings]. Di2010f/Di2510f/Di3010f/Di3510f 9-29...
Page 213
The number of rings may be set between 1 and 20. After verifying the entered information, touch [Enter] key. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. 9-30 Di2010f/Di2510f/Di3010f/Di3510f...
The initial setting from the factory is “No” Password Communication (Communi- cation Password “00”). How to Register the Communication Password Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [FAX Setting]. Touch [Password Com.]. Di2010f/Di2510f/Di3010f/Di3510f 9-31...
Page 215
Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. For details on password transmissions, refer to “Transmitting Various Faxes” in the Fax Operations volume of the User Manual. 9-32 Di2010f/Di2510f/Di3010f/Di3510f...
Received documents are saved to a box without printing. The initial setting is Print for all types of documents. Regardless of the setting, all documents are printed for remote copy receiving. The order of the document management settings is “F-CODE”, “RX Port” and “Public Documents”. Di2010f/Di2510f/Di3010f/Di3510f 9-33...
9.10 Setting Document Management for RX Document Management with F-CODE Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [Doc Manage.]. Touch [F-CODE]. Touch the key you want to register. 9-34 Di2010f/Di2510f/Di3010f/Di3510f...
Page 218
[←] and [→] arrows to move the cursor and input, or press the [C] key and re-input. Touching [Delete], deletes the character at the cursor point. ❍ Touching [Cancel] returns the screen to the state before registration began. Di2010f/Di2510f/Di3010f/Di3510f 9-35...
Page 219
[←] and [→] arrows to move the cursor and input, or press the [C] key and re-input. Touching [Delete], deletes the character at the cursor point. ❍ Touching [Cancel] returns the screen to the state before registration began. Touch [Remote Input Check]. 9-36 Di2010f/Di2510f/Di3010f/Di3510f...
Page 220
9.10 Setting Document Management for RX Select either [ON] or [OFF] for remote input check, and touch [Enter]. Touch [Enter]. Touch [RX Doc. Settings]. Di2010f/Di2510f/Di3010f/Di3510f 9-37...
Page 221
[Detail] to confirm detailed settings for the destination. How do you delete a forwarding destination? ➜ Select the destination and touch [Delete]. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. 9-38 Di2010f/Di2510f/Di3010f/Di3510f...
A maximum of 300 forwarding recipients can be registered. Document Management by Port Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [Doc Manage.]. Touch [Port]. Di2010f/Di2510f/Di3010f/Di3510f 9-39...
Page 223
Touch [RX Doc. Settings]. ❍ When [Yes] is selected, the settings for each port are used. The method for handling a document and the forwarding recipient can be changed. ❍ When [No] is selected, the settings for each port are ignored. 9-40 Di2010f/Di2510f/Di3010f/Di3510f...
Page 224
[Detail] to confirm detailed settings for the destination. How do you delete a forwarding destination? ➜ Select the destination and touch [Delete]. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. Di2010f/Di2510f/Di3010f/Di3510f 9-41...
A maximum of 300 forwarding recipients can be registered. Document Management for Public Documents Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [Doc Manage.]. Touch [Public document]. 9-42 Di2010f/Di2510f/Di3010f/Di3510f...
Page 226
[Enter]. Do you wish to print the document and forward it to another recipient? ➜ Touch [Prt&Forward]. Then, touch [Add Dest.], specify the recipient where the document is to be forwarded, and then touch [Enter]. Di2010f/Di2510f/Di3010f/Di3510f 9-43...
Page 227
When adding a recipient by touching [Add Dest.], the recipient must first have been registered as a one-touch key. (page 6-5) A maximum of 300 forwarding recipients can be registered. To display the ducuments saved on the box, refer to “Using the Document Func- tions” in the “Fax Operations” volume. 9-44 Di2010f/Di2510f/Di3010f/Di3510f...
Touch [Admin. 1], and then touch [Rep. Print]. Touch key for the list you want to output. The list is printed out. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. Di2010f/Di2510f/Di3010f/Di3510f 9-45...
Whether to automatically print the activity report every 50 communications. How to Set up the TX Report Bring up the Administrator Management screen according to “Displaying the Administrator Management Menu” on page 9-2. Touch [Admin. 1], and then touch [Report Settings]. Touch [TX Report]. 9-46 Di2010f/Di2510f/Di3010f/Di3510f...
Page 230
OFF: Select this so TX reports are not automatically printed out. After verifying the entered information, touch [Enter]. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. Di2010f/Di2510f/Di3010f/Di3510f 9-47...
Select either [ON] or [OFF] for automatic TX reports, and touch [Enter]. After verifying the entered information, touch [Enter]. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. 9-48 Di2010f/Di2510f/Di3010f/Di3510f...
❍ For bit selection: Touch [Bit Selection], and use the [←] and [→] keys to place the cursor on the bit you want to change. Use the 10-Key Pad to enter a [0] or [1], and touch [Enter]. 9-50 Di2010f/Di2510f/Di3010f/Di3510f...
Page 234
10-Key Pad and the letters [A] to[F] to specify the bits, and touch [Enter]. To change other modes, repeat steps 3 and 4. Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return to the Basic screen. Di2010f/Di2510f/Di3010f/Di3510f 9-51...
Specifies whether to look up Do not look up or not to look up a Look up communication password for an RX 1, 0 * Do not change these bits. 9-52 Di2010f/Di2510f/Di3010f/Di3510f...
The grayed out cells are the settings at the time of purchase. Details Setting Explanation 7, 6, 5, 4, 3, 0001010 * Do not change these bits. 2, 1 Specifies whether to attach Do not attach the destination on the Attach transmission original Di2010f/Di2510f/Di3010f/Di3510f 9-53...
The grayed out cells are the settings at the time of purchase. Details Setting Explanation 7, 6, 5 * Do not change these bits. Transmission receiving No transmission receiving setting* Transmission receiving 3, 2, 1, 0 0011 * Do not change these bits. 9-54 Di2010f/Di2510f/Di3010f/Di3510f...
* Do not specify times other than those above. Specifies whether to shrink or Shrink truncate an incoming Truncate document that is too long to fit on the paper (available only when RX printing) * Do not change this bit. 9-56 Di2010f/Di2510f/Di3010f/Di3510f...
• When “Fit to Width” is set, paper that is wider is not selected • When “Same Width” is set, paper having the same width is selected 2, 1, 0 * Do not change these bits. Di2010f/Di2510f/Di3010f/Di3510f 9-57...
Do not display the set-up confirmation the set-up confirmation screen screen when broadcasting Display the set-up confirmation screen when broadcasting Always display the set-up confirmation screen regardless of whether broadcasting or not * Do not specify this setting. 9-58 Di2010f/Di2510f/Di3010f/Di3510f...
Not attached Specifies whether or not a Attached date report is attached. Received date in Fax mode Attached within the image Specifies whether the time Attached outside of the image report is attached outside or inside of the image. Di2010f/Di2510f/Di3010f/Di3510f 9-59...
Rotate (sorted) * Do not change these settings. Specifies whether to do 2 in 1 No 2 in 1 recording for incoming faxes. 2 in 1 okay 3, 2, 1, 0 0000 * Do not change these bits. 9-60 Di2010f/Di2510f/Di3010f/Di3510f...
* Do not change this bit. Specifies whether to allow Disallow selection of the manual feed Allow tray when receiving a fax 1, 0 * Do not change these bits. * Available when the optional feed unit is mounted. Di2010f/Di2510f/Di3010f/Di3510f 9-61...
Specifies whether to clear the Do not clear contents of the main screen Clear after a copy is made where the automatic paper feed was used 4, 3, 2, 1, 0 00000 * Do not change these bits. 9-62 Di2010f/Di2510f/Di3010f/Di3510f...
— — — 8-1/2 in. Legal L — Letter L — 8-1/2 × 5- — — — 1/2 C 5-1/2 in. 8-1/2 × 5- — — — — — 1/2 L 2: Copying possible —: Copying not possible 10-4 Di2010f/Di2510f/Di3010f/Di3510f...
Letter C (8-1/2 × 11 C), Letter L (8-1/2 × 11 L), 8 × 10-1/2 Paper capacity 500 sheets (21 lbs.) Power requirements Supplied by main unit Power consumption Less than 15 W 22-1/2 in. (width) × 21-1/2 in. (depth) × 10-1/4 in. (height) Dimensions Weight About 48-1/2 lbs. Di2010f/Di2510f/Di3010f/Di3510f 10-5...
Letter C (8-1/2 × 11 C) Paper size Paper capacity 2,500 sheets (21 lbs.) Power requirements Supplied by main unit Power consumption Less than 45 W 22-1/2 in. (width) × 22-1/4 in. (depth) × 10-1/4 in. (height) Dimensions Weight About 57-1/4 lbs. 10-6 Di2010f/Di2510f/Di3010f/Di3510f...
1 Bin Paper capacity Plain paper (15 to 24 lbs.): Maximum 200 sheets postcards, envelopes, overhead projector transparencies, label sheets: Maximum 20 sheets 11 in. (width) × 14-1/2 in. (depth) × 2-1/4 in. (height) Dimensions Weight About 1-1/2 lbs. Di2010f/Di2510f/Di3010f/Di3510f 10-7...
17-1/2 (22-3/4) in. (width) × 8 (11) in. (depth) × 18-3/4 in. (height) Dimensions (The values within parentheses are the measurements with a media tray installed.) Weight 20-1/2 lbs. Accessories 1 staple cartridge MS-2C (2,000 staples) Power requirements Supplied by finisher 10-8 Di2010f/Di2510f/Di3010f/Di3510f...
Letter C (8-1/2 × 11 C), Letter L (8-1/2 × 11 L), 5-1/2 × 8-1/2 L/C Paper capacity JS-203 100 sheets (21 lbs.) Main unit’s output tray 250 sheets (21 lbs.) 17-3/4 in. (width) × 17-1/2 in. (depth) × 3 in. (height) Dimensions Weight About 3-3/4 lbs. Di2010f/Di2510f/Di3010f/Di3510f 10-9...
Housing cover ➜ Clean the surface of the housing cover by wiping it with a soft cloth dampened with a mild household detergent. Original glass ➜ Clean the original glass by wiping it with a soft, dry cloth. 10-10 Di2010f/Di2510f/Di3010f/Di3510f...
In addition, never use mild household detergent or glass cleaner to clean the operation panel or touch panel. Original glass ➜ Clean the original glass by wiping it with a soft, dry cloth. Di2010f/Di2510f/Di3010f/Di3510f 10-11...
10.3 Function Combination Table 10.3 Function Combination Table 10-12 Di2010f/Di2510f/Di3010f/Di3510f...
Page 258
10.3 Function Combination Table Di2010f/Di2510f/Di3010f/Di3510f 10-13...
Page 259
10.3 Function Combination Table 10-14 Di2010f/Di2510f/Di3010f/Di3510f...
Page 260
10.3 Function Combination Table Di2010f/Di2510f/Di3010f/Di3510f 10-15...
Page 261
:The settings can be specified, but the function selected first is not performed. :The settings can be specified, but the function selected later is not performed. :This setting cannot be selected since the “Booklet Creation” setting is not selected. 10-16 Di2010f/Di2510f/Di3010f/Di3510f...
Page 262
:This setting cannot be selected since the “Book” setting cannot be selected. I: A warning message should appear. I: The settings can be selected, but either the function will automatically be cancelled or the function is not performed. Di2010f/Di2510f/Di3010f/Di3510f 10-17...
8 in. × 10 in. 203 mm × 254 mm Quarto 5-1/2 in. × 8-1/2 in. 140 mm × 216 mm Statement Invoice 4 in. × 6 in. 4 in. × 6 in. 102 mm × 152 mm 10-18 Di2010f/Di2510f/Di3010f/Di3510f...
257 mm × 364 mm × 0.577 10 in. × 14-1/4 in. × 0.707 × 0.500 × 1.154 × 0.816 182 mm × 257 mm × 0.577 7-1/4 in. × 10 in. × 0.707 × 1.640 × 1.154 × 1.414 Di2010f/Di2510f/Di3010f/Di3510f 10-19...
Page 265
11 in. × 17 in. × 1.294 11 in. × 14 in. × 1.076 × 0.647 Letter Invoice 8-1/2 in. × 11 in. 11 in. × 17 in. × 1.294 215.9 mm × 279.4 mm 11 in. × 14 in. × 1.272 10-20 Di2010f/Di2510f/Di3010f/Di3510f...
Page 266
11 in. × 14 in. × 1.647 139.7 mm × 215.9 mm × 1.545 Legal × 1.529 Foolscap × 1.294 Letter Zoom ratio = Paper size/Document size 1 in. (inch) = 25.4 mm 1 mm = 0.0394 in. (inch) Di2010f/Di2510f/Di3010f/Di3510f 10-21...
Note Only use toner that has been manufactured specifically for this machine. Do not throw away the used toner cartridges. Instead, keep them in their boxes to be collected by your service representative. 10-22 Di2010f/Di2510f/Di3010f/Di3510f...
10.5 Consumables Staple Cartridges MS-5D for the finisher Staples for staple binding 5,000 staples are provided in the staple cartridge. MS-2C for the saddle kit Staples for staple binding 2,000 staples are provided in the staple cartridge. Di2010f/Di2510f/Di3010f/Di3510f 10-23...
Call can, however, be received if the machine is equipped with an Extra Telephone Set. If an Extra Telephone Set that is usable even during power failure is connected, it can be used for making and receiving calls. 10-24 Di2010f/Di2510f/Di3010f/Di3510f...
Page 271
Bulletin boards .................. 6-25 Care of the machine ................ 10-10 Character ..................6-33 Communication password ..............9-31 Confidential boxes ................6-29 Confidential list .................. 7-13 Consumables .................. 10-22 Copy program ................5-38 5-40 Cover mode .................4-2 Crease/Center staple ................ 5-30 11-2 Di2010f/Di2510f/Di3010f/Di3510f...
Page 272
FAX telephone number ................9-5 F-CODE ..................6-9 9-34 File margin ..................4-11 Forwarding list ...................7-19 Function combination table ..............10-12 ID key ....................5-19 Image repeat ..................4-15 Image stamp ..................5-34 Image stamping .................4-21 Indexes ....................6-2 Initial settings ..................8-4 Installation site ..................3-2 Job separator ..................10-9 Di2010f/Di2510f/Di3010f/Di3510f 11-3...
Page 273
One-Touch Lists .................. 7-7 Operating environment ............... 3-4 Output tray ..................5-26 Page insertion ................4-5 Panel cleaning .................. 5-43 Paper ....................10-22 Paper feed cabinet ................10-5 Paper feeding ..................1-4 Paper orientation ................. 1-5 Paper sizes ..................10-18 11-4 Di2010f/Di2510f/Di3010f/Di3510f...
Page 274
Specifications ..................10-2 Specify the date and time ..............8-4 Specify the time zone ................8-5 Staple cartridges ................10-23 Switch back unit .................10-5 Symbols .....................6-35 Time zone ....................8-5 Toner bottle ..................10-22 Toner replenisher ................5-44 Transmission ..................9-13 TSI names ...................9-9 TX report ....................9-46 Di2010f/Di2510f/Di3010f/Di3510f 11-5...
Page 276
Copyright 2003 MINOLTA CO., LTD. Printed in Japan The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. MINOLTA CO., LTD. 2003. 06 3-13, 2-chome, Azuchi-Machi, Chuo-ku, Osaka. 541-8556, Japan...