Transport Section - Minolta Di 620 Manual

1155SBM1700A
17

TRANSPORT SECTION

Rotation of Suction Fan Motor results in the paper separated from the PC Drum
being drawn onto the turning Suction Belts. As a result, the paper is smoothly car-
ried to the Fusing Unit.
The Suction Belts are turned by the Suction Belt Drive Roller which is driven by PC
Drum Drive Motor.
Four rubber belts are used as the Suction Belts. There are small holes in each belt
to enhance the drawing power of the Suction Fan Motor. Further, each belt has a
rough surface which prevents slippage during paper transport.
PC Drum Drive Motor
(M2)
Air
CONTROL SIGNAL
M14
HALF SPEED
PJ3A-7B
M-113
Suction Fan Motor (M14)
FULL SPEED
H L
Suction Belt
1155M021AA
WIRING DIAGRAM
B-8