Removal Of The Scanner - Minolta Di 620 Manual

7) Removal of the Scanner

1. Remove the Original Glass.
2. Remove two screws and the Scanner cover.
1155D214AA
3. Unplug two connectors.
1155D045AA
4. Remove one screw and the flat cable holding bracket.
5. Remove three screws and the flat cable.
1155D046AA
6. Slide the Scanner to the right. Then, remove the four screws shown and turn the Scanner to the left
to remove it from the copier.
1155D047AB
NOTE
When the Scanner have been replaced, perform Address Adjust.
D-34