Control Panel Keys And Indicators - Minolta EP4000 Operator's Manual

16

4. Control Panel Keys and Indicators

Touch Panel
1
Shows various screens and messages.
See Touch Panel
Start Key
2
Press to start a copy cycle.
If pressed while the copier is warming
up, it enables the Auto Copy Start
Function. p. 21
Clear Key
3
Press to:
Reset the multi-copy entry to 1.
Clear a zoom ratio entered when setting
one from the 10-Key Pad.
Stop Key
4
Press to stop a multi-copy cycle.
Panel Reset Key
5
Press to set the copier into the initial
mode, clearing all settings made
previously on the control panel.
Note: It does not, however, clear the
contents of the zoom and job
program memory and the settings
made immediately before the
Interrupt mode.
13
p. 18
p. 25
p. 25
p. 38
p. 25
p. 21
User Mode
Job Recall
Mode Check
12 11 10
Interrupt Key p. 22
6
Press to interrupt a current job with a
different one.
Press it again to return to the previous job.
Energy Saver Key
7
Press to set the copier into the Energy
Saver mode. p. 21
Access Mode Key
8
Press to enter the access number.
Note: This key becomes valid only when
Copy Track of the Administrator
mode available from User's Choice
is set.
10-Key Pad
9
Use to enter:
The number of copies to be made.
The zoom ratio to be used.
The number of originals.
p d ª · e
R s [ ¯ « •
Z x I [ g x1.000
Z x { ƒ
p. 22
p. 25
p. 38
R s [
{
1
p I [
p