Control Panel Keys And Indicators - Minolta Di250 Operator's Manual

2-14

3. Control Panel Keys and Indicators

Control Panel Keys and Indicators
1 Touch Panel
• Shows various screens and messages.
p. 2-15
2 Utility Key
• Press to show the utility mode.
3 Mode Check Key
• Lists the current settings on the screen.
From this screen you can access the setting
screen of a particular function and change or
cancel the setting as necessary.
• Access to register the current settings in the
program. p. 4-10
4 ID Key
• Press to enter the access number when Copy
Track of the Administrator mode available
from User's Choice is set.
• Press to access the setting screen available.
5
10-key Pad
• Use to enter the number of copies to be
made and the various numeric values.
1 2
6 Interrupt Key
• Press to interrupt a current job with a
different one. Press it again to return to the
previous job.
• Lights up to indicate that the copier is in the
p. 4-2
Interrupt mode.
7 Clear Key
Press to :
• Reset the multi-copy entry to 1.
• Clear the settings entered from the 10-key
p. 2-25
Pad and the access code entered.
• Clear the image data scanned.
8 Panel Reset Key
• Press to set the copier into the initial mode.
p. 2-27 9 Stop Key
Press to :
• Stop a print cycle.
• Stop a scanning cycle.
10
Start Key
• Press to start the document scanning
sequence or print cycle.
• Lights up green to accept a print command;
lights up orange to reject one.
3
Access
2(%
10
9
p. 2-25
p. 2-25
4
5
6
7
8