Phc Board - Minolta Di 620 Manual

Symbol
DIPSW1-6
Factory Check
DIPSW1-7
Switches
DIPSW1-8
Memory Board CPU
SW1
Reset Switch
LED1 Operation Check LED
LED2 Operation Check LED
Compression Check LED
LED3
(including reading)
Expansion Check LED
LED4
(including printing)
LED5 Fatal Error Check LED
LED6 Error Check LED
LED7 Caution Check LED
LED8 Attention Check LED
LED9 Power Check LED
LED10 Reset Check LED
1155SBS0304A

3-4. PHC Board

Name
Used when making factory checks.
Note 1: NEVER use these switches in the field.
Note 2: Initial settings are "OFF" for all.
Used to reset the CPU on the Memory Board.
Starts blinking at 0.5-second intervals when the Power
Switch is turned ON.
Lights up when the system is ready for operation.
Lit up during compression.
Lit up during expansion.
Lights up when an error that is categorized as "fatal" occurs.
Lights up when an error that is categorized as an "ordinary"
error occurs.
Lights up when a condition that is categorized as a "caution"
occurs.
Lights up when a condition that is categorized as "attention"
occurs.
Lights up when power is supplied to the Memory Board.
Lights up when the Memory Board is reset.
Description
S-7
1155S015AC