Removal Of The Pc Drum; Replacement Of The Cleaning Felt Pads; Removal Of The Main Erase Lamp - Minolta Di 620 Manual

5) Removal of the PC Drum

6) Replacement of the Cleaning Felt Pads

7) Removal of the Main Erase Lamp

1161D037AA
1. Remove the PC Drum Charge Corona.
2. Unlock two PC Drum Lock Levers and remove the PC
Drum.
NOTE
When the PC Drum has been replaced, clear the count of
PC Drum 3 of PM Counter 2/4 available from Tech. Rep.
mode and perform the F5 operation (AIDC Sensor
Adjustment).
1161U032AA
1. Slide out the PC Unit and remove the Cleaning Unit.
2. Remove the PC Drum.
3. Peel off the Cleaning Felt Pads and replace them with new
ones.
NOTE
When the Cleaning Felt Pad has been replaced, clear
Waste Toner Count of Consumables Counter available
from Tech. Rep. mode.
1155D119AA
1. Remove the PC Drum.
2. Remove one screw and flat spring.
3. Unplug two connectors and remove the Main Erase Lamp
holder.
4. Remove one screw and the Main Erase Lamp.
NOTE
When the Main Erase Lamp has been replaced, perform
the F5 operation (AIDC Sensor Adjustment).
1155D070AA
5. Using a soft cloth dampened with alcohol, clean the lamp
by gently wiping its surface in one direction.
1155D121AA
D-42