Registration (Fd - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

11) Registration (FD)

This adjustment must be made after the PH has been replaced and following the Zoom (FD) Adjust.

Adjustment Procedure

1. Call the Adjust mode to the screen.

2. Touch [Printer] and [Registration (FD)], in that order.

3. Touch [400 dpi].

4. Press the Start key to let the copier produce a test pattern on five sheets of A4 crosswise or Letter

5. Pick out one test pattern output on which the distance between the leading edge of the paper and

the image start position is just about average visually. Check to see if width A on the test pattern is

up to the specifications. If it is outside the specified range, perform the following adjustment steps.

Width A on the test pattern output should fall within the

following range.

Specification

5.0 ± 0.5 mm

Setting Range

Registration (FD)

-8.2 to +8.2

Table of Contents