4) Cleaning of the Vertical Transport Rollers
5) Replacement of the Vertical Transport Rollers
1. Remove the Paper Take-Up Unit.
2. Remove the Misfeed Removal Knob, edge cover, and two pressure springs.
3. Remove four C-clips, two bushings, one gear, and two bearings.
4. Remove the Vertical Transport Roller (white) by sliding it in the direction shown.
5. Loosen two screws on the Paper Guide Plate and remove the Vertical Transport Roller (black) by
sliding it in the direction shown.
NOTE
When the Vertical Transport Rollers have been replaced, perform Loop Adjustment.
1. Open the Right Door.
2. Using a soft cloth dampened with alcohol, wipe clean each
Vertical Transport Roller.
1075D016AA
D-15
1155D006AA
1155D007AA