Control Panel Keys And Touch Panel - Minolta EP3050 Operator's Manual

16

3. Control Panel Keys and Touch Panel

Touch Panel
1
Shows various screens and messages.
See Touch Panel
Start Key
2
Press to start a copy cycle.
If pressed while the copier is warming
up, it enables the Auto Copy Start
Function. p. 25
Stop Key
3
Press to stop a multi-copy cycle.
p. 37
Clear Key
4
Press to:
Reset the multi-copy entry to 1.
Clear a zoom ratio entered when setting
one using the 10-Key Pad.
Panel Reset Key
5
Press to set the copier into the initial
mode, clearing all settings made
previously on the control panel.
Note: It does not, however, clear the
contents of the zoom and job
program memory and the settings
immediately before the Interrupt
mode.
12
p. 18
p. 37
p. 36
p. 24
10
Auxiliary
User Mode
Ready to Copy
Job Recall
Mode Check
11
Interrupt Key
6
Press to interrupt a current job with a
different one. Press it again to return to
the previous job.
Energy Saver Key
7
Press to set the copier into the Energy
Saver Mode. p. 26
Access Mode (ID) Key
8
Use to set the Access mode.
Note: For details see the User's Choice.
p. 27
10-Key Pad
9
Use to:
Enter the number of copies to be made.
Enter the zoom ratio to be used.
Enter the number of originals.
Finishing Orig. Copy
Auto Exp. x1.000
Exposure Zoom
1
p. 38
Basic
1
Auto Paper
Paper