Address Adjust - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

3) Address Adjust

When is this adjustment required?

Be sure to perform the Address Adjust after the following items have been done.

• Replacement of the CCD Unit and Scanner parts (including the Exposure Lamp)

Adjustment Procedure

2. Call the Tech. Rep. mode to the screen.

3. Touch [I.R. & EDH Check] and [Function (I.R.)], in that order.

4. Touch [Address Adjust].

5. Press the Start key to execute Address Adjust.

The Start key remains lit up orange while this function is being run and lights up green as soon as

the sequence is completed.

6. If the adjustment was made okay, touch [Save] to save the adjustment value.

7. After the adjustment, touch [End] and then [Menu] to recall the Tech. Rep. mode to the screen.

1. Lower the Electronic Document Hander with no original

placed on the Original Glass.

Table of Contents