Replacing The Water For The Water Heater Tank [Water Chang]; Cautions For Replacing; Cautions For Handling The Antifreezing Liquid - MIMAKI UJF-605RII Operation Manual

Uv inkjet printer
Table of Contents

Advertisement

Replacing the Water for the Water Heater Tank [WATER CHANG]

In order to keep the ink at an appropriate temperature, operate the water heater. Put the
antifreezing liquid and water in the water heater tank in the water heater.

Cautions for Replacing

• Do not add water.
• Ratio of soft water to the antifreezing liquid should be
2 (Soft water) : 1 ( Antifreezing liquid).
• When only soft water is put in the water heater tank without the antifreezing
liquid, it may damage the heads.
• Check the water heater every six months to be sure the water heater tank
is sufficiently clean and has the appropriate water.
• The water in the water heater tank frequently becomes insufficient, contact
your nearest sales agency or MIMAKI sales office.
• Discard the water/antifreezing liquid mixture by the disposal regulations of
the area where the printer is used.

Cautions for Handling the Antifreezing Liquid

• Be sure to wear the goggles and the gloves during handling the
antifreezing liquid.
• Use the exclusive antifreezing liquid by MIMAKI , or the water heater may
be damaged.
• Do not touch the antifreezing liquid directly. If the it gets on the skin or
clothes, immediately wash it off with soap. If you gets the antifreezing liquid
in your eyes, immediately wash your eyes with a lot of running water. Then,
contact a doctor as soon as possible.
• Be sure to store the antifreezing liquid in a cold and dark place.
• Store the antifreezing liquid in a place that is out of reach of children.
• Have an industrial waste disposal contractor discard the waste antifreezing
liquid, clarifying its contents.
• Before using the antifreezing liquid, be sure to read the Material Safety
Data Sheet (MSDS).
• To purchase a space tank, contact your nearest sales agency or MIMAKI
sales office.
• Prepare a polyethlene tank to move the waste water heater tank water.
• When the water in the water heater tank is insufficient, an error message is
displayed as below. In this case, replace the water by the following steps.
ERROR 70
WATER LACK
- 3-8 -

Advertisement

Table of Contents
loading

Table of Contents