Table of Contents
Advertisement
Error message
ERROR 60
FLASHING nnnn
ERROR 61
TEMP ss
ERROR 70
WATER LACK
ERROR 71
WATER DEVICE ss
ERROR 72
UV POWER OFF
ERROR 73
UV DEVICE SS
ERROR 74
UV DEVICE
ERROR 90
F/W ss
Cause
The flashing action time out error
has been occurred.
The head temperature is abnormal.
The amount of the water is
shortage.
The water heater error has been
occurred.
The UV device power is off when
the printer is started.
The UV device error has been
occurred.
The UV device outputs abnormal
signals.
The firmware is defective.
- 6-8 -
Corrective measures
Turn off the power and turn it on
after a while. If the same error
message appears again on the
LCD, contact your local distributor
to call for service.
Make sure to check the amount of
the water in the waste heater tank.
(
P.3-8)
Turn off the power and turn it on
after a while. If the same error
message appears again on the
LCD, contact your local distributor
to call for service.
Advertisement
Table of Contents
