Table of Contents
Advertisement
5. Set the roll attached to the feeding unit, to
the center.
Turn the handle located at right side of the feeding
unit clockwise to set the roll media to the center of
the feeding unit.
• Turn the handle back to 1/4 position
from the position where the handle is
turned firmly.
6. Lift up the roll set lever.
7. Attach the empty paper core to the take-up
unit.
With the roll holder attached the edges, attache
the empty paper core to the take-up unit.
• Previously turn the handle counter-
clockwise to open the holder guide
widely.
• Put down the roll set lever.
8. Set the empty paper core attached the
take-up unit to the center.
Turn the handle located at the right of the take-up
unit to set the empty paper core to the center of
the take-up unit.
• Turn the handle back to 1/4 position
from the position where the handle is
turned firmly.
9. Lift up the roll set lever.
10. Turn on the printer.
Turn on the printer and keep it ready and waiting.
Feeding unit
Rollset lever
Empty paper core
Empty paper core
Roll set lever
- 2-10 -
Roll media
Handle
Take-up unit
Take-up unit
Handle
Advertisement
Table of Contents
