About Functions Of Uv Lamp Status Indicator - MIMAKI UJF-605RII Operation Manual

About Functions of UV Lamp Status Indicator

This section describes the functions of three UV lamp status indicators which are located
under the power switch of the printer. The status indicators represent three modes in com-
bination. The UV lamp automatically goes OFF when there is no printing for more than 30
minutes. If there is no printing for a long time (more than 30 minutes), turn the UV lamp
OFF. ( P.4-7)
Flowchart for the UV indicator
Main unit power ON
Red: OFF
Orange: OFF
Green: OFF
NO
Red: OFF
Orange: OFF
Green: Blink
NO
READY MODE
UV lamp steadily ON
Red: OFF
Orange: OFF
Green: ON
NO
AFTER
COOLING UV lamp being cooled
MODE
Red: OFF
Orange: ON
NO
Green: OFF
YES
Main unit power OFF
UV lamp OFF
YES
Press
REMOTE key?
NO
Start
TEST DRAW ?
YES
UV lamp preheated
<Display Indication>
UV NOT READY
Preheating
completed?
YES
YES
Error occurred?
NO
YES
Turn off
UV lamp ?
NO
No operation
for 30 minutes
YES
Cooling
completed?
YES
- 1-15 -
Error remains
UV lamp OFF
Main unit stopped
ERROR MODE
Red: ON
Orange: OFF
Green: OFF
Main unit power OFF