Printing Repeatedly (COPY)
Print the last transmitted data again.
This operation can be carried out from the operation panel or sub-panel in the same way.
• If the temperature in the water heater or in the UV device has not reached
the predetermined value, a message is indicated. In this case, printing is
disabled. It is enabled when the error indication has disappeared.
STEPS:
1. After printing data, enter the LOCAL
mode.
Set the media.
2. Touch the [COPY].
3. Touch the [ENTER].
4. The LOCAL mode is displayed after print-
ing is completed.
• When the previous data does not
exist, the message shown below
appears and the LOCAL mode is
displayed.
< COPY>
UV NOT READY
<COPY>
NO DATA
<COPY>
WATER NOT READY
COPY
- 2-32 -
<<LOCAL>>
COPY
< COPY > 600X 600
HOST / 32P
<<LOCAL>>
<ENT>