When The Printing Quality Is Defective - MIMAKI UJF-605RII Operation Manual

When the Printing Quality is Defective

This section describes ways of dealing with defective printing quality.
Deal with it according to the situation.
If the problem is not solved, contact your local MIMAKI distributor or MIMAKI office call for
service.
Lines/thin spots occur
Corrective measures : 1. Perform the head cleaning. (
Large ink drop on media during printing
Corrective measures : 1. Clean the caps. (
Media is lifted during printing and printing is interrupted.
During printing, media may be lifted due to the heat of the UV lamp, and printing may be
interrupted.
Corrective measures :Set new media and start printing.
2. Clean the interior of the station. (
3. If dust adhere on the head path, remove it.
2. Clean the head. (
3. Remove dust on the media.
4. Remove dust on the table.
5. Clean undersurface of the carriage.
( P.3-16)
6. Enable Regular wiping function.
- 6-3 -
P.2-29)
P.3-3, 5-6)
P.3-3)
P.2-29)
( P.5-5)